Dissertation > Excellent graduate degree dissertation topics show

Thermal Performance Analysis of Machine Tool Structure and Topology Optimization of Supporting Components

Author: CuiLei
Tutor: YangDiXiong；ZhangYongCun
School: Dalian University of Technology
Course: Engineering Mechanics
Keywords: CNC Machine Tools FEM Analysis Thermal Performance Topology Optimization Optimal Mathematical Models
CLC: TG502
Type: Master's thesis
Year: 2011
Downloads: 146
Quote: 0
Read: Download Dissertation

Abstract


With the machinery manufacturing industry becoming more competitive and shorter production cycle, improving design efficiency has become an important means to dominate the market. Engineering research and practice show that about 80% of cost of the whole machine life cycle is determined in the design phase, but the cost of this phase is less than 3% of the total cost. The research of "Machine tool digital design and software implementation considering static and dynamic thermal characteristics" not only provides software platform for the digital design, but also supports the development of machine tool toward the trend of high speed, high precision and composite function, and provides technical support to enhance the product performance and design and manufacture efficiency, which is an important part of "High-end CNC machine tools and basic manufacturing equipment".Closely around the goals of subject, this paper develops the thermal analysis module of MATO software, and validates the accuracy of this module by the standard questions, as well as verifies the applicability to machine tools by the thermal performance analysis of a series of the whole machine tools and spare parts. The results of thermal analysis provide data support for the thermal design of machine tools. Moreover, this paper examines the applicability of innovative architecture to key components of CNC machine tools by the topology optimization, and establishes several optimal mathematical models to carry out innovative design of several typical components based topology optimization. The main works of this paper are listed as follows.(1) The thermal analysis module of MATO software is verified by two aspects. One is benchmark example, the other is practical component of CNC machine tool. Both of the validation results show that the thermal analysis results of MATO software is right. In addition, the numerical results are analyzed and valuable data are extracted, which present the direction for improving thermal characteristic of machine tool.(2) Using a mathematical model of static and dynamic collaborative optimization, the optimal saddle of DLH20 machine tool is obtained based on topology optimization. Further, the innovative configuration is designed by simulating the topological optimization result. However, the second frequency of new design reduces much, so the mathematical model of maximizing second frequency is applied, then the initial innovative configuration is improved. Meanwhile, the static and dynamic characters of the final configuration are enhanced.(3) CNC machine tool bed of DLH20 has complex structural form, which combines the two structure of solid and slab. For this structure, it is difficult to get a better topological result by a topology optimization. Therefore, minimizing the compliance and maximizing the frequency of tool bed are separately applied, and the size of inner ribs are optimized. Finally, it is indicated that the stepwise topology optimization can intuitively exhibit the optimal material distribution of tool bed under various conditions, and observe how to distribute the material is beneficial to increase some order frequency. In addition, the static stiffness of the final innovative configuration of tool bed is increased substantially.

Related Dissertations

  1. Study on Shear Bearing Capacity of HRBF500-Reinforced Concrete Beams,TU375.1
  2. The Structure Design and Toplogical Optimal Analysis for the Key Components of Tunnel Type Washer,TM925.33
  3. A Fast Precision Evaluation Equipment for CNC Machine Tools,TG659
  4. Passive microfluidic channel mixer topology optimization,TH703
  5. CNC lathe spindle thermal characterization,TG519.1
  6. Units containing bibenzimidazole polyimide synthesis , structure and properties,TQ323.7
  7. Consider the elastic deformation of the mold stamping AHSS rebound control and topology optimization,TG386
  8. BC / PVA composite gel film preparation and properties of,TB383.2
  9. Aluminum die-casting thermal module design research,TG249.2
  10. Inverter refrigerator system dynamics and control strategy,TB657.4
  11. Passive heating and building thermal performance analysis methods,TU832
  12. Topology Optimization of Muffler Internal Configuration for Acoustical Performance,TB535.2
  13. The Research under the Modular Background of China’s CNC Machine Enterprise’s Technological Capability Growth Path,F426.4
  14. The Research of Structural Topology Optimization Based on the Hybrid Cellular Automaton Method,O342
  15. Study of Post-Processing System for Five-Axis CNC Machine Tools Based on UG,TG659
  16. Optimizing Analysis of the Performance of Direct Expansion Solar Assisted Heat Pump Water Heating System,TK513
  17. Analyse of Thermal Performence and Thermal Stress of Solar Cavity Heat Receiver,TK513
  18. Thermal Performance Modeling of Power Plant Boiler System and the Application of Optimization of Coal Blending,TK227
  19. Thermal Performance and Operation Characteristics of a Novel Solar Energy Water Heating System in Conjunction with Air Source Heat Pump,TU822
  20. Study on Building Envelope Comprehensive Thermal Performance Based on System Identification Theory,TU111.4
  21. The Topology Optimal Study of Truss Structures Based on Improved Genetic Algorithm,TP18

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > General issues > Machine tool design, manufacture and maintenance
© 2012 www.DissertationTopic.Net  Mobile