Dissertation > Excellent graduate degree dissertation topics show

Study on the Mechanism and Techniques of Chemical Plating Ni and FeNi on Hollow Microspheres

Author: WangChao
Tutor: ChengHaiBin
School: Wuhan University of Technology
Course: Materials Processing Engineering
Keywords: electroless plating magnetic hollow microspheres magnetic properties Ni and FeNi thin films mechanism
CLC: TQ153.1
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


In this paper, the effects of pretreatment process on the chemical plating Ni and FeNi on hollow microspheres were investigated by contrast experiments. A new simplified pretreatment process, alkaline cleaning with NaOH and activation with AgNO3, was obtained. Comparing with the traditional pretreatment processes (alkaline cleaning, roughening, sensitization, activation, reduction), the new pretreatment method eliminated the processes of roughening and sensitization, and incorporated the catalytic reduction with the Ni2+ reduction to achieve the chemical plating Ni and FeNi on hollow microspheres. Experimental results show that the hollow microspheres coated Ni and FeNi were magnetic. The Saturation mag-netization of the hollow microspheres coated FeNi was higher than that of coated Ni.The possible mechanism of chemical plating Ni and FeNi on hollow micro-spheres was suggested as follows:at first, [Ag(NH3)2]+ was absorbed on hollow microspheres surface via hydroxy after alkaline cleaning; then, [Ag(NH3)2]+ was reduced into Ag atom by H2PO2-; the Ag atom was the catalytic center for Ni or FeNi deposition.In the processes of chemical plating Ni and FeNi, the velocity of reaction was increased with increasing the concentration of Ni2+ and reducing agent H2PO2-, temperature and loading, however, decreased with increasing the concentration of [C6H5O7]3-. Inaddition, the pH 8.5-9.5 of bath was suitable for chemical plating Ni and FeNi on hollow microspheres.

Related Dissertations

  1. Study on Hermetic EDGE Sealing of Anodic Bonding for Vacuum Glazing,TQ171.1
  2. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. The Effect of Composite Additive on the SNCR,X701
  5. Kunming Transient Population Community Present Situation, Question and Countermeasure Preliminary Study,C924.25
  6. The Research on a New Modular Self-Reconfigurable Robot,TP242.2
  7. Study on Wastewater Purification Effect of the Free Surface Wetland with Different Substrates and Plant Combination,X703
  8. The Research of the Dynamic Process of Advertising Public Opinion,G206
  9. Research of Multicast Protocol in Wireless Sensor Networks,TN929.5
  10. Study on Application of Non-phosphate Additive in Frozen Penaeus Vannamei and Mechanism of Water-holding,TS254.4
  11. Incentive Mechanism Research of the New Generation of Migrant Workers,F272.92
  12. Shandong Province,university research projects Integrated Management Model,G644
  13. Process and Mechanism of Eucalyptus Pulp Bleaching Catalysed by Cu2+/Co2+,TS745
  14. The Environmental-Friendly Method and Process of Removing Non-Cellulosic Matters from Bamboo for Textile Fiber,TS652
  15. Minority environmental rights,D922.68
  16. Research and Implementation on Service-Oriented Multi-Agent System Cooperation Mechanism,TP393.09
  17. Studies on the Models of the Reform of Chinese Marine Management System,D630
  18. Gel - Foam Preparation of porous alumina insulation materials,TQ174.1
  19. The Research on Sulfate Leaching Properties of Cation-exchange Resin Used in Power Plants,TQ425.23
  20. Preparation and Anticorrosion Properties of Doped Polyaniline/Epoxy Coating,TQ637
  21. Practice and prospects of the Clean Development Mechanism in China,X38

CLC: > Industrial Technology > Chemical Industry > Electrochemical industries > Electroplating industry > A single metal plating
© 2012 www.DissertationTopic.Net  Mobile