Dissertation > Excellent graduate degree dissertation topics show

Study of the Cogging Torque in Permanent Magnet Machines

Author: ZhangKe
Tutor: ShangGuanZuoFeng
School: Henan Polytechnic University
Course: Power Electronics and Power Drives
Keywords: PM motor Permanent magnet Cogging torque Reduction
CLC: TM351
Type: Master's thesis
Year: 2011
Downloads: 347
Quote: 0
Read: Download Dissertation

Abstract


With the improvement of the properties of permanent magnet material, permanent magne(tPM) machine is more and more widely used to sophisticated control system of speed and position. However, with permanent magnet electric motor, permanent magnet and slot armature iron core interact with each other to produce teeth slot torque, to be specific, the teeth slot torque comes from the tangential force between the rotor permanent magnet and the stator tooth, being the result of the interaction between permanent magnetic pole and the rotor slot, which will exist even there is no current in the rotor. The teeth slot torque may cause pulsation and noise to output torque, which will influence the position control system and speed control system, especially the function and accuracy of the low-speed system. The teeth slot torque influences electric motor’s low-speed performance in the speed control system and the high-speed performance and accuracy in the position control system. Tile synchronous magnetization magnetic pole is the most widely used on permanent DC electric motor, surface permanent synchronous electric motor and brushless DC motor.In this paper, the methods of weakening the cogging torque of permanent synchronous electric motor are categorized into three types, i.e., changing the parameters of permanent magnetic pole and the parameters of armature and choosing reasonable number of armature slots and poles. And specific methods of weakening cogging torque are also illustrated here. The author employs the software Magnet to calculate the cogging torque of a 4-pole 24-slot permanent synchronous electric motor. The several methods of weakening cogging torque, including tilted slot, tilted pole, magnetic pole excursion and optimized polar arc and auxiliary slot, are analyzed in different motor structures. The results coincide with those worked out with numeric values adopted in other articles. In actual project, either one or more than one weakening methods can be used according to the situation. Though teeth slot torque cannot be completely eliminated, we can make it acceptable with reasonable methods.

Related Dissertations

  1. Experimental Research on Influence of Coal Reburning Reaction Conditions on NO_x Reduction by Non-Catalytic Reduction of Ammonia,X701
  2. Experimentation Research for Deoxidize Reaction Process of NO_X Adopt Different Reburnning Fuels,TK227.1
  3. Parameterization Design and Research of Permanent Magnet Synchronous with Fractional-slot and Concentrated Winding,TM341
  4. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  5. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  6. Study of Tin Alloy Carbon Composite Used for Lithium Ion Battery,TM912.9
  7. Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
  8. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  9. Physical Fields’ Characteristic Study & Structural Optimization of a SCR Denitrification Reactor,X773
  10. Study on the Synthesis of the Polypyrrole-Cobalt Oxides and Their Catalytic Behavior for the Electroreduction of H2O2,O643.32
  11. Study on Properties of Ce、Co、Ni/V-W/TiO2 Modified by Composite Sol for Selective Catalytic Reduction,X701
  12. Applied Research of Emulsified Fuel on S195 Diesel Engine,TE626.24
  13. Theory of China’s Carbon Emissions and Strategy Research in Service Outsourcing,X321
  14. Based on Rough Set of Urban Areas When Traffic Green Control System Research,TP18
  15. The Effect of Reducing Fertilization on Yield and Quality of Greenhouse Tomato,S641.2
  16. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42
  17. Study on the Interactive Mechanism of Energy Conservation and Pollution Reduction between Government and Enterprises,D922.68
  18. Research on the Problems and Countermeasures of Low Carbon City in Chongqing,X321
  19. Open Reduction and Internal Fixation of Displaced Scaphoid Fractures,R687.3
  20. Minimally Invasive Locking Plate Fixation for Treatment of Pilon Fracture,R687.3
  21. High-rise building under the jointed rock slope stability studies,TU457

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Permanent magnet motor
© 2012 www.DissertationTopic.Net  Mobile