Dissertation > Excellent graduate degree dissertation topics show

The Application of the Charge Pump in Driving the Piezoelectric Actuator

Author: HuangLiang
Tutor: FengZhiHua
School: University of Science and Technology of China
Course: Measuring Technology and Instruments
Keywords: piezoelectric stack hysteresis creep switch capacity charge pump
CLC: TM282
Type: Master's thesis
Year: 2011
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


Piezoelectric ceramic is a smart material which has been widely used in precision control, micro-nanofabrication, energy recycle, etc. However, piezoelectric ceramic exists nonlinear characteristics of hysteresis and creep. These characteristics affect its positioning precision and accuracy seriously which restricts the scope of application. Solving the problem of hysteresis and creep of piezoelectric ceramic has become a worldwide leading subject. Some approaches have been used to overcome the hyste-resis and creep in domestic and foreign. Because the displacement of piezoelectric is proportional to its drive voltage: a newly construct is presented in this paper: switch capacity charge pump. It can eliminate the hysteresis and creep of piezoelectric ce-ramics effectively.In this paper, the piezoelectric theory is reviewed at first; then analysis the rea-sons of the hysteresis and creep characteristics. According to the traditional drive con-struct, switched capacitor charge pump structure is proposed. Finally, build the ex-periment test platform, test and analysis the results of the driving structure of the switched capacitor charge pump. The new drive method can reduce the hysteresis and creep more effectively. Then, analysis the advantage and disadvantage of the driving method; summary the various parameters on the hysteresis and creep characteristics.The piezoelectric stack used in the experiment is made from 200 layers of ce-ramic stack. The size of piezoelectric stack is 10mm×10mm×18mm. It can with-stand 0 ~ 100V voltage, displacement range can reach 0 ~ 14μm. Experimental results show that the new structure can make a very good linearity; hysteresis characteristic can be reduced. When the displacement frequency is 0.01Hz, the hysteresis size is 2.01%, as the frequency increased; linearity improved, hysteresis also decreased. When frequency is 20Hz, the hysteresis size is 0.57% which is much smaller than the traditional voltage driving. Simultaneously; using this method can make the creep properties better compared to traditional voltage driving. The error can be reduced to 77%. The displacement response becomes more quickly. This drive control method of novel structure, high stability, high control precision, convenient adjustment, enabling the expansion of the scope of application of piezoelectric ceramics.

Related Dissertations

  1. A Study on Thermal-Mechanical Damage Behaviour of 60Si2Mn Steel,TG142.15
  2. Research of the Performances of Ferroelectric Film and Compositional-Graded Ferroelectric Film,TM221
  3. Research on Compensation of Hysteresis in Piezoceramic Actuators,TM282
  4. Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils,TP391.44
  5. The Study on the Creep Resistance Property of Ultra-High Molecular Weight Polyethylene Fiber,TQ342.61
  6. The Research of Concrete Shrinkage and Creep Experiment,TU528
  7. Research on High Temperature Mechanical Behavior of Copper Alloy Materials with Aerospace Power Systems,V250.2
  8. Based hysteresis motor characteristics Prandtl-lshlinskii model study,TM359.9
  9. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  10. Chemical Reaction Hysteresis Induced by Capillary Condensation Within the Catalyst Pellets,O643.36
  11. Design of a 2.5GHz PLL Clock Generator,TN911.8
  12. AC motor direct torque control technology research and simulation,TM34
  13. Design of White LED Driver Circuit with High Efficiency Based on the Charge Pump,TN312.8
  14. Research on Thin-Film Hysteresis Loop Measurement System Based on Extraordinary Hall Effect,O484.43
  15. The High Voltage Generation System Design in Nano-Crystal Memory,TN47
  16. Development of Electric Actuator Servo System,TM921.541
  17. Motion of an Inclusion in Piezoelectric Material and Influence of Inclusion on Creep Characteristic of Piezoelectric Material,O346.1
  18. Studies on Railway Bridge Coupled Vibration of Train Rail-Bridge System Under the Influence of Creep,U441.3
  19. A Low Power Power Management System for Passive RFID Tag Chip,TN402
  20. Fuel cell vehicles with high-frequency inverter system harmonic analysis and suppression,TM464
  21. A low jitter CMOS PLL design,TN911.8

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Electric and ceramic materials > Piezoelectric ceramics
© 2012 www.DissertationTopic.Net  Mobile