Dissertation > Excellent graduate degree dissertation topics show

Failure Analysis and Test Validation on Differential Coupling Device in HEV

Author: ZhengShuai
Tutor: ZengXiaoHua
School: Jilin University
Course: Vehicle Engineering
Keywords: HEV Power Split Device Automotive Differential Failure Analysis
CLC: U469.7
Type: Master's thesis
Year: 2011
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


Hybrid electric vehicle (HEV) which includes internal combustion engine and electric motor is the best solution for the transition from conventional cars to pure electric vehicles. Power-split HEVs combines the advantages of series and parallel. Its power split device is a core component. Development of efficient, reliable power split device is a key element for the development of power-split hybrid cars.Currently, the most successful power-split hybrid car is none other than Prius. Toyota has applied international patents for the power-split devices in Prius. With hybrid cars in China for further, research on the development of new type power split device needs more and more urgent.This paper relies on the National Natural Science Foundation of "The research on drive mechanism and control theory of a new power system for power-split HEV ", which puts forward a new idea of applying conventional automotive differential as power split device. In this paper, issues on the basis of previous theoretical arguments, in order to validate this idea by the bench test, carried out some research.First, through the experimental phenomena after a differential test and the failure situation about main parts of original redesign differential after the previous bench test, demonstrates the differential needs new changes design to reduce the friction if used as the power split device.Second, considering the analysis of the differential dynamic characteristics including the internal friction, by CATIA and ADAMS established a multi-joint rigid and soft body dynamic simulation model, combined with the working condition when failures occurred in previous bench test, to analyze the main reasons causing the differential pinion gear shaft failure.Third, considering the interaction between the structure and the heat, in the ABAQUS environment, the establishment of stress field and temperature field coupled finite element simulation model for pinion gear and pinion gasket to analyze the gasket stress, strain and temperature distribution at maximum load, explained severe wear pads on the pinion gear.Finally, based on the analysis, redesigned the automotive differential and test on the testing bench. The test results validate the feasibility of this new redesigned differential used as differential power split device, which laid the research foundation for the eventual development of a complete differential hybrid system(DHS) in power-split hybrid electric vehicle.

Related Dissertations

  1. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  2. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  3. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  4. Study on Ultrasonic Testing Technology for Motor Bolt in Service,TM31
  5. Aanalysis of Genotype and ORF3 Gene Mutation of Hepatitis E Virus in Wuhan,R512.6
  6. An Integrated Model for C-e Government Website Translation,H315.9
  7. The production-proven 45nm NOR Flash,TP333
  8. Advanced EFA electrical failure analysis the positioning technology PFA physical verification technology research,TN407
  9. Research on the DF8002 Dispatching Automation System and Countermeasures of Its Common Faults,TM734
  10. Research on Permanent Magnet Synchronous Motor for Traction of Hevs,TM341
  11. Analysis on Hull Girder Ultimate Strength and Residual Strength of Damaged Ship by CSR,U661.43
  12. Seroepidemiological Survery of Hepatitis E from Sheep in Xinjiang and Cloning and Expression of HEV ORF2-62 Gene,S858.26
  13. The Application of Failure Analysis for DRAM Product,TN407
  14. Failure Analysis Application in Advanced Semiconductor Process,TN405
  15. Structural stress analysis of laminated composite plate with a hole,TB33
  16. Research on Fixed Value Setting and Design on Management System of Relay Protection for Power Plan,TM774
  17. Large rolling synchronous motor damper bar Failure Analysis and Countermeasures,TM341
  18. Design and Implementation of the Kitty Hawk the -500 aircraft landing gear fault diagnosis system,V226
  19. Long Life Design of Distribution Chute and Research of Residual Life,TF321.3
  20. The Developmentof Substation Fault Analysis System and the Study of New Fault Location Method for Transmission Line,TM774
  21. Application and Improvement of VM600 Monitoring Turbine Safety Monitoring Protection System,TM621.3

CLC: > Transportation > Road transport > Automotive Engineering > A variety of automotive > Various energy vehicles
© 2012 www.DissertationTopic.Net  Mobile