Dissertation > Excellent graduate degree dissertation topics show

Research of Semi-active Suspension Device of Double All-terrain Tracked Vehicles

Author: LiDeLong
Tutor: HuangHaiDong
School: Jilin University
Course: Mechanical and Electronic Engineering
Keywords: Tracked vehicle Adjustable damper Semi-active suspension Fuzzy control Simulation
CLC: U463.33
Type: Master's thesis
Year: 2011
Downloads: 74
Quote: 1
Read: Download Dissertation

Abstract


The suspension device of double tracked all-terrain vehicle flexibly connect the body and the wheels, it can pass all the force and torque between body and wheels,which cushion and absorb the impact because of the road surface excitation, so it can reduce body vibration, to ensure that the vehicle riding comfort and operational stability.Mainly relying on a cooperation project of a double tracked all-terrain vehicle manufacture between Jilin University and Harbin Special Vehicle Limited Company, This study make a research on the vehicle’s suspension device. Using Semi-active suspension,through simulation, This study want to prove its greater capability and than the passive suspension device and cost-effectiveness than the active suspension Rarely used in today’s semi-active suspension tracked vehicle areas, there are broad prospects for development.This study mainly optimizes the suspension device of the double tracked vehicles’s front one. The main content includes the following sections:(1) Firstly,the study describes the overall structure of semi-active suspension and its principle, and selecting the appropriate damping coefficient for semi-active suspension damping damper, according the force interactions between the double tracked vehicles and the V angle barrier with larger probability to determine the adjustable damper layout scheme in suspension system of the tracked vehicle.(2) Secondly, according to the evaluation index, establish dynamics model for single round and half car suspensions and simulation dynamic equation based on Matlab/simulink. At the same time this paper establish the road excitation model by filter white noise simulation method.(3) Then,this paper designs the fuzzy logic control system, firstly selecting the 2D fuzzy controller as fuzzy controller of this article, then summing up 49 fuzzy control rules which are listed in the table and selecting the body vertical and pitch acceleration as the input variable of the fuzzy controller, adjustable output variable damper coefficient as the output variable. Then, the study select the basic domain and domain of input and output variables and ascertain the scale factor of input variables and proportion factor of output variables.(4) Finally, this study makes simulation on passive suspension of the tracked vehicle and semi-active suspension model basing on Matlab/simulink, the establishment of the simulink model includes two kinds of device model including with a single wheel suspension model with two dynamic degrees and half of the front vehicle with eight dynamic degrees,to the first one, the study determines the output variables as vertical body acceleration suspension deflection and tire deflection; to the other, the study determines body vertical acceleration、body pitch angular acceleration、suspension deflection and tire deflection of the first、the second and the sixth wheel as the output variables. Through the respectively simulation of passive suspension device and semi-active suspension device and compare the same evaluation indexes shows that the capability of semi-active suspension device is significantly superior than the passive suspension and further evidence of semi-active suspension of vehicles is much higher than the passive suspension vehicles in riding comfort and operational stability,.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  3. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  4. Study on Springback of High-Strength Steel Stamping,TG386
  5. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  6. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  7. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  8. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  9. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  10. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  11. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  12. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  13. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  14. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  15. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  16. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  17. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  18. Numerical Simulation of Biomass Direct Reburning,TK16
  19. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  20. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  21. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Travel System > Suspension
© 2012 www.DissertationTopic.Net  Mobile