Dissertation > Excellent graduate degree dissertation topics show

The Design and Research on the Automatic Transmission of Electric Vehicle

Author: LiuJunJie
Tutor: ZhaoQiPing
School: Wuhan University of Technology
Course: Mechanical and Electronic Engineering
Keywords: Electric Vehicle Transmission Pro/E Ansys
CLC: U463.212
Type: Master's thesis
Year: 2011
Downloads: 177
Quote: 0
Read: Download Dissertation

Abstract


As the shortage of petroleum resource all the world,and also see the Enhanced Greenhouse Effect and the emission of poisonous gasses, the environmental problems becomes more and more serious, the research and development of electric vehicle has already begun in every country. Along with the development of science technology, people have higher request to automobile.and because the manual transmission has some disadvantages in the practical applications,it will be an inevitable trend that the manual transmission will be replaced by automatic transmission.The paper carries on the design and research of an four-speed automatic transmission based on a 5-speed manual transmission that are mainly used for mini cars. That requires fairly good dynamics performance and economic performance without changing its basic design parameters.The article researches and analyzes the automatic transmission according to the given parameters and the performance requirements of complete vehicle. second, the choice of drive motor type is achieved in this article in order to improve the electric vehicle’s overall performance. Furthermore,the paper calculated the motor’s performance parameters and its transmission parts’ relative parameters,attained four gears of the automatic transmission and designed its transmission ratio appropriately.Then it mainly designed the transmission parts of the transmission, selected related parts and calculated its parameters, calculated and checked some important components on the basic of theory.And then 3-D models of the transmission parts are set up by using a 3D modeling software PRO/E. In the process of making model, the parametric modeling method is used for helical gears. It can construct an actual model of cylindrical gear by defining a range of parameters,and can get other gear models conveniently by modifying the characteristic parameters. So it can help to avoid refounding model and largely improve the efficiency of design by this method. After establishing corresponding solid model, the three-dimensional model is imported into the finite element analysis software ANSYS. Because each axle and the gear stand the largest loading when the car is running at the fir st gear,the paper analyses the situation.And established finite element analysis model by selecting element types, defining material properties, meshing and so on.Then apply ANSYS to researche and analyze related parts and compon ents in statics to get the stress and strain condition.By analyzing the the stati-c characteristics, the simulation result is evaluated ulteriorly.So the design an-d research provide necessary theories foundation and design methods for desig ning automatic transmission for electric vehicle.

Related Dissertations

  1. Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
  2. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  3. Research on an Axial/Radial-Axial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for Hybrid Electric Vehicle,TM341
  4. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  5. Research on Infrared Image Simulation for Aerial Objects and Background,TP391.41
  6. The Development of Soft System for Power Load Management Terminal Testing Device,TP311.52
  7. Research on Data Acquisition and Transmission Technology in High Speed Digital Image Acquisition System,TP274.2
  8. Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
  9. Zhou Naiyu academic thinking and clinical experience and the Qi of the spleen and clinical studies for the treatment of Sjogren's syndrome,R249.2
  10. The Design of Embedded Image Transmission Terminal Based on the TCP/IP Protocol,TP368.1
  11. Research on the Theory of the Transmission-line Metamaterials and Their Applications,O441.6
  12. Phosphoproteomics Studies on Cotton (Gossypium Hirsutum) Fiber Initiation Development,S562
  13. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  14. Research on Wireless Monitoring System of Nuclear Waste Temporary Storage Radiation Field,TL751
  15. Research on a Fire-fighting Shell for Towers,TU892
  16. Research on Key Technologies for Image Compression and Transmission in Telemedical System,R318.0
  17. Research and Application of the Oil Gas Water Measuring Technique Based on GLCC,TE33
  18. A Research on Soil Transmission Medium of Rice Stripe Virus,S435.111.42
  19. Raindrop characteristics and signal transmission of the laser,P412.22
  20. Study on Technologies of Manufacturing Feature Extraction and Intelligent Process Decision-Making,TH162
  21. Study of the Mechanical Strcture of a De-Icing Robot for 220kV Transmission Lines,TP242

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Transmission > Mechanical transmission > Transmission
© 2012 www.DissertationTopic.Net  Mobile