Dissertation > Excellent graduate degree dissertation topics show

Research on Connected Hydro Pneumatic Suspension System

Author: FangXin
Tutor: MiaoMing
School: Dalian University of Technology
Course: Mechanical Design and Theory
Keywords: Connected Hydro Pneumatic Suspension System Characteristics Study Hose Damping Design Method
CLC: U463.33
Type: Master's thesis
Year: 2011
Downloads: 90
Quote: 0
Read: Download Dissertation

Abstract


Connected hydro pneumatic suspension system(CHPSS) has the low inherent frequency and high antiroll ability, and is widely used in construction machinery and advanced cars. The research on CHPSS can provide some support for product design.In this paper, mathematic model of CHPSS is built, which contains hose damping. Based on the mathematic model, stiffness characteristics and damping characteristics are analyzed. The vertical linear stiffness will be reduced if the accumulator volume and gas precharged pressure are added, and will be added if the suspension mass is added. The rolling angular stiffness will be reduced if the accumulator volume and gas precharged pressure are added, and will be added if the distance of two cylinders, and area ratio of cylinder, and suspension mass are added, especially the area ratio, which has a very significant effect. The damping coefficient will be reduced if the diameters of orifice and hose are added. And the adding of check valve’s diameter will also reduce the damping coefficient, but only for compression processing, not for rebound processing. For hose damping, when the diameter is added to some numerical value, the difference to damping coefficient is small, so the hose diameter should be reasonable chosen, not too thin or thick. If the hose diameter is reasonable, the hose length has a small effect on damping coefficient. The vibration processing of car body is analyzed and point that for the compression biggest velocity, there will be lots of fluid oils entering accumulator, so the accumulator has to meet this requirement, and there will be lots of fluid oils entering the cylinder’s little chamber, so the check valve has to meet it. For the rebound biggest velocity, there will be lots of fluid oils discharging from cylinder’s little chamber, so the orifice is hope big, but for suppressing the vibration the orifice is hope small. This paper advances to compute orifice’s diameter by the equivalent damping ratio, and equivalent damping ratio is computed by the method of equivalent energy. At last, this paper points that if suspension mass is changed, the gas precharged pressure should be changed to keep the antiroll stiffness fixed, and if so, the inherent frequency and damping ratio can also be in reason. But if the relationship of ratio between gas precharged pressure and balance pressure is not suitable, we can change the accumulator volume by changing the oil circuit with the electric valve.In this paper, the characteristics of CHPSS are analyzed detailedly and a whole design method is prompted. The research results of this paper can provide help for the engineering application. So it has a significant meaning.

Related Dissertations

  1. Large-span Roadway Bolt Anchor Combined Support Study,TD353
  2. Research on Design Method for Pipe Transmission System in Deep Sea Pipe Layer,TE953
  3. Simulation and Optimization of Process in Injection Molding for TIR-R Lenses,TQ320.662
  4. Two-stage Matrix Converter Based Permanent Magnet Synchronous Motor Vector Control,TM341
  5. China’s Outstanding Curling Athletes Special Physical Characteristics of the Study,G862.6
  6. Output feedback control for uncertain nonlinear systems,TP13
  7. Synchronization of Fractional-order Chaotic System Based on Direct Design Method,O415.5
  8. Applying Study on Asphalt Treated Base,U414
  9. Research on the Designing of Asphalt Mixture Based on the GTM Design Method,U414
  10. The Seismic Action Comparison between Chinese, American, European and Japanese Seismic Design Codes for Buildings,TU352.11
  11. Study on the Plan and Design of the Older Friendly Public Park,TU986
  12. Overall Performance Optimization Design and Numerical Simulation Research of Section Centrifugal Pump Used Coal-fired Plant,TH311
  13. The Design and Optimization of Manufacturing Facility Layout Based on Systematic Layout Planning and Genetic Algorithms,TP18
  14. Research on Underground Fan Room of the Highway Tunnel,U453.5
  15. Airborne Sieve Post-mortem Control System Based on Asphalt Mixing Plant,U415.5
  16. Research on Design Method of Prestressed Concrete Box Girder with Corrugated Steel Webs,U448.213
  17. Study on the Simplified Design Approach in Limited State for 3.0m×7.5m Large Composit Slab with Sparkling Cement,TU318
  18. Research on Mechanical Behavior and Design Method of Cold-formed Steel Trusses,TU392.1
  19. The Research on the Manifestation of "New Chinese Style" Furnishings Based on the Traditional Culture,J525
  20. Study on Method of Product Design for Seniors Based on Design Science of Human Affairs,TB472
  21. The Truck Escape Ramp Design Method on the Mountainous Expressway Downhill Section,U412.3

CLC: > Transportation > Road transport > Automotive Engineering > Automotive structural components > Travel System > Suspension
© 2012 www.DissertationTopic.Net  Mobile