Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation and Control Research on Plate Unit Welding Deformation

Author: LuoWenChen
Tutor: MaoYunSheng
School: Wuhan University of Technology
Course: Design and manufacture of ships and marine structures
Keywords: ANSYS Plate unit Welding deformation Numerical Simulation Deformation control
CLC: U441
Type: Master's thesis
Year: 2011
Downloads: 199
Quote: 1
Read: Download Dissertation

Abstract


Steel box girder structure is used widely in large cable-stayed bridge and various elevated bridge because of its own quality light, simple structure, the characteristics of large carrying capacity. Orthotropic plate unit is the main component of steel box girder, it consists of steel plate(top、bottom)、U-rib and diaphragm plate. The diaphragm plate generally is assembled and welded while steel box girder bridge deck manufacturing or installing on-site, and the plate unit that welded U-rib is assembled in the production workshop.At present the common plate unit structure includes three to five U-ribs, while welding the U-ribs, the plate unit mainly has four forms of welding deformation, they are longitudinal contraction deformation、transverse contraction deformation、the longitudinal surface bending deformation and angular deformation. The welding deformations generated in the process of manufacturing the plate have a negative impact on the performance、the dimension preciseness and stability, and they also cause the unfavorable influence at steel box girder assembly production, Because of the large numbers and great workload when building bridge, if not value, they will cause great loss.Based on the previous research, with large common software ANSYS, this paper researches how to realize the 3D dynamic simulation of welding temperature fields、stress field and welding deformation, then uses the research result to simulate the welding process of the typical top plate unit with U-ribs. In the process of numerical simulated calculating, with the thermal-structure coupling function of ANSYS software and indirect coupling, welding temperature field is calculated firstly and the results are saved in file type of *.rth, and then temperature results recovered from the former files are added on the structure models as load to simulate the stress and strain field. By simulation of temperature field and stress field in the indirect method, the temperature distributions at different times, residual and strain distribution is gotten using the birth-death element method, then the analysis of the welding deformation regulations and characteristics can be gotten, they can give the guidance of optimizing the welding procedure and rectifying the welding deformation.The paper mainly researches on the following contents:1.Establishing three dimensions finite element model of welding process analyzing welding temperature field and welding stress temperature, obtaining welding residual stress’s distributing rule.2. Summarizing the types and influencing factors of the plate unit welding deformation and analyzing the causes, on the basis of them, the paper compares the numerical simulation results with the actual value.3.According to analyze the characteristics, the paper comes up with control measures from three aspects including pre-welding, welding and post- welding.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  11. Numerical Simulation of Biomass Direct Reburning,TK16
  12. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  13. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  14. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  15. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  16. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  17. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  18. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  19. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  20. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  21. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649

CLC: > Transportation > Road transport > Bridges and Culverts > Structural principles, structural mechanics
© 2012 www.DissertationTopic.Net  Mobile