Dissertation > Excellent graduate degree dissertation topics show

The Numerical Simulation and Experimental Research on the Extrusion of AZ80 Magnesium Alloy Wheels

Author: WangJianJun
Tutor: ZhangZhiMin
School: University of North
Course: Materials Processing Engineering
Keywords: AZ80 magnesium alloy plastic forming numerical simulation mold design
CLC: TG379
Type: Master's thesis
Year: 2011
Downloads: 85
Quote: 1
Read: Download Dissertation

Abstract


Today magnesium alloy is well known as the 21st century green project material because of environment-friendly, lightweight, energy-saving and satisfying the requirement of sustainable development. So the magnesium alloy is used more and more in automotive, electronics, aerospace and other fields. Magnesium alloy cast can be used for raw materials, through the extrusion processing to eliminate defects and improve the mechanical properties. The Magnesium alloy wheels can meet the requirements of lightweight, reduce costs and meet the energy saving purposes.According to the characteristics of the parts of the structure, the extrusion forming process can be developed. The finite element modeling is founded based on the extrusion forming processing. The division of the grid, material properties of the applied, the definition of the friction boundary conditions, the equipment selection and speed and temperature of extrusion process are all analyzed using the modeling. By numerical simulation, the affection of the mold structure and process parameters on the extrusion process is analyzed during anti-extrusion, the bottom forming, and flanging die of AZ80 magnesium alloy. Focusing on the affection of the convex and concave mold shape, rounded corners and flared slope flanging and other important process parameters on metal flow. The distribution of the temperature and the equivalent strain and the change of load conditions are be emphasized. A reasonable forming process with good mold structure and proper process parameters can be developed through simulation.Based on above studies, the mold can be designed and conformed. The results show that the rational design of mold structure, uniform metal flow, good filling effect, high precision of extruded products. The mold can achieve the desired results, and provide the basis of the actual production.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Extrusion > Non-ferrous metal and alloy extrusion
© 2012 www.DissertationTopic.Net  Mobile