Dissertation > Excellent graduate degree dissertation topics show

Analysis and Reserch on Continuous Machining Path of Five-Axis Hybrid Machine Tool

Author: WangXiaoMin
Tutor: ZhaoTieShi
School: Yanshan University
Course: Mechanical and Electronic Engineering
Keywords: Hybrid machine tool Continuous machining path Virtual coefficient Continuous axis Simulation
CLC: TG659
Type: Master's thesis
Year: 2011
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


Compared with the traditional parallel machines, the continuous machining paths of hybrid machine tool with deficient—rank parallel mechanism can hardly be intuitively judged. And there isn’t a uniform theory about how to judge it, which causes obstacles for the spread of hybrid machine tools. In this paper, the continuous machining path of hybrid machine tools is studied, which can provide theoretical basis for the further study of the planning and control of continuous machining path of hybrid machine tool.Firstly, the sufficient and necessary conditions of continuous motion of a constrained rigid body are presented with the investigation into the derivative of the virtual coefficient. Then, taking 3-PSP, 2UPS-2RPS and 3-UPU as examples, the corresponding mathematical and geometric criteria of them are obtained and the sufficient and necessary conditions of continuous motion of constrained rigid body are specifically explained.Secondly, based on the analysis of the geometry conditions of continuous axes of 3UPS/UP parallel mechanism, the mathematical expressions of continuous axes of Tricept hybrid body are derived. And the relevant mappings are drawn. Then, the condition of continuous motion of Tripod hybrid machine tool, with better performance, is analyzed, and the continuous axes of it are compared with those of Tripod hybrid machine tool.Thirdly, several special tool paths which can be formed by continuous axes in the work space are drawn, and the judgement condition of whether the arc path is the continuous machining path of machine tool is presented, then, some arc machining paths in typical planes are discussed.Finally, taking the typical continuous machining paths as examples, the above conclusion can be verified by simulating with software. The work of this paper is of great guiding significance to the further study of the path planning of hybrid machine tools.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  9. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Power System Dynamic Voltage Stability Simulation Study Based on Precise Integration Method,TM712
  18. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  19. Research on Spaceborne Hyperspectral Sensor Simulation,TP391.9
  20. Research on Evaluation of Simulation Systems Based on Fidelity,TP391.9
  21. Application and Research of Dual Control in Vertical Landing Aircraft,TP273

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Program control machine tools, CNC machine tools and machining
© 2012 www.DissertationTopic.Net  Mobile