Dissertation > Excellent graduate degree dissertation topics show

Research on Hot Extrusion Processing Properties for 304LN Stainless Steel Pipe

Author: GaoWei
Tutor: RenYunLai
School: Yanshan University
Course: Materials Processing Engineering
Keywords: Constitutive equation Processing map Numerical simulation Extrusion Process
CLC: TG376.9
Type: Master's thesis
Year: 2011
Downloads: 105
Quote: 1
Read: Download Dissertation

Abstract


Steam Generator heat-transfer tube in PWR power station are one of the most important components of domestic which are in urgent need. In this dissertation, mainly basing on experimental research,the hot workablity of 304LN stainless steel,such as ,high temperature deformation behavior, thermal processing map and simulation of tube extrusion were analyzed and studied, And through comparing the simulation experiment, to get the suitable processing parameters.In the dissertation,through by isothermal and equal-strain rate hot compression experiments,we get the deformation behavior on high temperature,and found the 304LN stainless steel is sensitive to temperature and strain rate.During the high temperature deformation process,we can find the dynamic softening by the true stress-strain curve. Through theoretical analysis, the mechanism of softening occurs mainly due to dynamic recrystallization occurred.The establishment of 304LN stainless steel constitutive equation is set up with Zener-Hollomon parameter , the hot deformation activation energy Q and the related material parameters are get.According to the processing map theory given by Prasad, the establishment of the 304LN stainless steel processing maps is based on the dynamic material model. In the parameters scope of Gleeble experiments get from,determine the 304LN stainless steel thermal processing parameters of the optimal range and should be avoided range of the parameters.In the dissertation,we use finite element software Deform to do simulation of the pipe extrusion,based on the rigid-plastic coupled thermo-mechanical FEM theory. According to the plastic deformation area of the temperature and strain rate, whether in the security area of processing map to judge whether the selected parameters accord with the hot extrusion process. Through different extrusion ratio and extrusion speed contrastand ,gives the material processing optimal parameters required for processing.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Study on Springback of High-Strength Steel Stamping,TG386
  3. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  6. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  7. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  8. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  9. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  10. Numerical Simulation of Biomass Direct Reburning,TK16
  11. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  12. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  13. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  14. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  15. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  16. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  17. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832
  18. The Design and Performance Simulation of External Valve Small Displacement Pump,TE933.3
  19. Analysis of the Impact of Tailings Dam Stability under Seepage Role,TV649
  20. Study on Hydraulic Fracturing of Low Permeability Reservoir,P618.13
  21. Numerical Simulation and Experimental Study of Air-Assisted Sprayer of Orchard,S491

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Extrusion > Extrusion process > Tube Extrusion
© 2012 www.DissertationTopic.Net  Mobile