Dissertation > Excellent graduate degree dissertation topics show

Study on the Preparation and Performance of Nano-carbon Composite Thermal Interface Material

Author: LinJin
Tutor: ZhangHaiYan
School: Guangdong University of Technology
Course: Polymer Chemistry and Physics
Keywords: thermal interface material thermal conductivity carbon coated metal nanoparticle thermal conductive thermal conductive pad
CLC: TB383.1
Type: Master's thesis
Year: 2011
Downloads: 75
Quote: 0
Read: Download Dissertation

Abstract


With the miniaturization and increasing power of microelectronics, heat dissipation has become critical to the performance, reliability, and further miniaturization of microelectronics. A typical thermal solution for a microelectronic system was to utilize a thermal interface material (TIM) between the die and the heat spreader, The TIM is used to reduce the contact resistance arising from the incomplete contact between two solid surfaces.TIM effectively reduced thermal resistance because of poor contact between the interface and mismatching in thermal cycle. To reduce heat accumulation, improve thermal conduct effectiveness, insulation, vibration absorption and encapsulation.In this study, a direct current arc discharge method was used to prepare core-shell type carbon coated aluminum (Al@C) nanoparticle and carbon coated copper (Cu@C) nanaoparticle respectively first. XRD, SEM, TEM, HRTEM methods were employed to analyze the characterization of nanoparticles. It was observed apparently the core-shell structure with inner core nano metal crystallization; the outer layers are graphite-like carbon layers. It revealed a preferable coating effect and there were no visibly aggregation emerged in nanoparticles. With methyl vinyl silicone as the base rubber, filled with Al@C nanoparticles, the heat dissipation composites were prepared by using the method of mechanical blending. The SEM was employed to analysis the dispersion of Al@C nanoparticles disperse in silicone rubber which showed that the nanoparticles uniform distribution in silicone rubber. The effect of Al@C nanoparticles on thermal conductivity and coefficient of thermal expansion (CTE) of the silicone rubber were investigated and it was found that thermal conductivity of the composite increased with increasing the Al@C nanoparticles content, the thermal ’conductivity began to decrease when the Al@C volume fraction reaches 50%. The thermal conductivity was 2.633W/(m.K). The optimum filling amount of Al@C nanoparticles is 50%. The CTE decreased with the loading increasing. TGA shows that the addition of Al@C nanoparticles increases the thermal stability of the silicone rubber.AlN、Al@C、Cu@C、BN were mixed with double component silicone gel to prepared flexible thermal conductive pads with sticky surface respectively compared to the matrix。The thermal conductivity and electric volume resistivity were measured, the measurements were revealed that thermal conductivities of the pads were raised with increasing loading of fillers. The thermal conductivities were 0.842W/(m.K), 0.798W/(m.K),0.788W/(m.K),0.762W/(m.K) when 45wt% of AlN、Al@C、Cu@C、BN usage respectively. Increased 2.63,2.44,2.40,2.28 times respectively.Thermal conductivities increased slightly when temperature rose. The electric volume resistivity of Pads with Al@C、Cu@C decreased when filler usage increased. Pads with AlN and BN met insulation requirements. Silicone rubber pulps were prepared by mixed Al@C、Cu@C nanoparticles in silicone solution, dip coating were conducted when the concentration was 30wt%, volatilize solvent, used glass fiber cloth as supporting construction, a thin silicone thermal conductive pad was attained after cured and trimed.

Related Dissertations

  1. Study on the Dynamic Thermal Test Device of Sprinklers,TU892
  2. The Experimental Research on Measurement of Thermal Contact Resistance of Two Contacted Solids and Thermal Conductivity,TK124
  3. Grooves on the surface of the impact of packaging interfacial thermal resistance,TN605
  4. Variable conditions in orbit, the spacecraft solar wing thermal - structural analysis,V442
  5. High thermal conductivity epoxy composites and Research,TB332
  6. Study on the Seasonal Frozen Roadbed Temperature and Deformation of Kangding Section of Sichuan-Tibet Highway,U416.1
  7. Research on Thermal Physical Parameters of Asphalt Mixture,U414
  8. Study on Surrouding Rock Thermal Couductivity Experiment and Distribution of Temperature Field in Deep Roadway,TD727
  9. Research on Thermal Conductivity of Particle Reinforced Aluminum Matrix Composites,TB331
  10. The new electronic packaging diamond / copper composite material,TB331
  11. Study on Graphite Composite of Radintor,TB332
  12. Thermal Conductivity and Application in Heat Pipe of Nanofluid,TB383.1
  13. The Thermal Conductive Pathway in Epoxy Encapsulants for Electronic Packaging and Its Properties,TQ174.1
  14. Research of Multi-Sensory Myoelectric Prosthetic Hand with Hardness and Thermal Conductivity,TP242
  15. Study on Thermal and Mechanical Properties of Porous Silicon Thermal Isolation Layer Used in Uncooled Infrared Microbolometer,TN215
  16. The double needle heat pulse undersea situ heat flow measurement technology research,P714.8
  17. Study on Special Coating for Thermo-Electric Boiler Protection,TG174.442
  18. Study on the Thermal Conductivity and Radiation Characteristics of Nanofluids,TB383.1
  19. The Study on Thermal Conductivity and Thermal Diffusivity Measurement Technology of Thermal Insulation Materials,TB34
  20. Study on Thermal Parameters of Nanofluid in the Application of Heat Pipe,TB383.1
  21. Study on the Modification of FEP with High Thermal Conductivity and Insulating,TB332

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile