Dissertation > Excellent graduate degree dissertation topics show
Application Research of Fiber Epoxy Rubber Asphalt Mixture in Steel Bridge Deck Pavement
Author: LinShengFeng
Tutor: ZhangRongHui
School: Guangdong University of Technology
Course: Bridge and Tunnel Engineering
Keywords: steel bridge deck pavement Finite Element Analysis polyester epoxy rubber asphalt the low-temperature crack
CLC: U444
Type: Master's thesis
Year: 2011
Downloads: 68
Quote: 0
Read: Download Dissertation
Abstract
|
Steel bridge deck pavement was the research hotspot and focus of transportation from the end of 20th century. It is complex on mechanical characteristics, in which is on orthotropic steel bridge deck. Moreover, because of deformation of the pavement and the effect of temperature and wheel load, steel bridge deck pavement is prone to crack, rutting, delaminate and shift.This paper analyses the mechanics performance by different position of wheel load in high and low temperature circumstance on steel bridge deck system by FEA. And inspect the performance of fiber epoxy rubber asphalt mixture by it as reference index.This research is focus on study the performance of fiber epoxy rubber asphalt mixture.. It analyses the causes of improving the performance of asphalt by fiber, epoxy resin and rubber powder. It effectively improves the three indexes of asphalt by adding rubber powder. When the proportion of rubber powder for asphalt is 20%, the three indexes are better. Meanwhile, it also analyses the mechanism of asphalt by epoxy resin. the epoxy of epoxy resin can react to the rubber thiol in epoxy rubber asphalt system. And it takes both advantages of epoxy resin and rubber by becoming macromolecular rubber network structure. Fiber has stability function in epoxy rubber asphalt mixture. It can improve the mixture’s low-temperature tensile strength to prevent low temperature brittle crack. This paper gets the results of OAC from adding different proportion of fiber quantity tby the goal proportioning design method. When the quantity of polyester fiber is 0.3% of the mixture, mixture gets good performance.when adding fiber quantity is 0.3%, low temperature splitting strength 0.3% mixture’s anti-crack intensity improved 31.3% than which do not add. Low-temperature anti-cracking performance gets better. And dynamic stability improves 44.2% so that it can improve anti-rutting performance. Moreover mixture’s water seeping inspection and skeleton structure depth inspection index are both better, which confirms mixture waterproof and anti-sliding performances are better.Fiber epoxy rubber asphalt mixture is new materials of road. It has high strength, high or low-temperature stable performance, and so on. The proportion of adding epoxy resin is low than general epoxy asphalt and it add rubber powder so that it can greatly save the cost of project. It can also bring good economic and social benefits.
|
Related Dissertations
- Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
- EDM Electrode Wear Mechanism and Control Research,TG661
- Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
- Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
- Study on the Recycling of Post-Consumer Polyester Textiles,X791
- Design of Testing Equipment for Electronic Products,TN06
- Study on the Preparation of Polyethylene Naphthalate and Its Performance,TQ316.33
- Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
- Airborne radar antenna pedestal rapid design systems research and development,TN959.73
- Sham hose drum drive means and hydraulic system of the structure,TE973
- The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
- Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
- Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
- Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
- Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
- Preparation of Hyperdispersant and the Influence of Its Structure to the Properties of UPR/ATH Composites,TB324
- Analysis on the Influence of Ultrafine Grinded IFR on Anti-dripping Property of Polyester Fibers,TS195.592
- M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
- The Design of Telescopic Asphalt Spraying System,U415.524
- Study on the Properties of Cotton-Like Polyester False-Twist Textured Yarn and Its Fabric,TQ342.2
- Synthesis and Properties of Hyperbranched Polymer Based Waterborne Polyurethane Emulsion,TQ323.8
CLC: > Transportation > Road transport > Bridges and Culverts > Bridge materials
© 2012 www.DissertationTopic.Net Mobile
|