Dissertation > Excellent graduate degree dissertation topics show

Research of MOEMS Accelerometer Based on SOI Micro-ring Resonator

Author: LiuZheng
Tutor: ZhangWenDong；ZuoShuBin
School: University of North
Course: Electronic information technology and instruments
Keywords: Accelerometer Micro-Ring resonator Quality factor Cantilever
CLC: TP212
Type: Master's thesis
Year: 2011
Downloads: 89
Quote: 0
Read: Download Dissertation

Abstract


As a sensitive device to acceleration, accelerometers have important applications in vibration sensing, impact detection, earthquake monitoring, inertial navigation, guidance system and other testing fields. With the rapid development of MEMS\NEMS technology, there is a higher precision requirement for accelerometer, including ultra-sensitive and rapid detection, and microoptoelectromechanical system (MOEMS) technology has been a surge in the research of various types of sensors based on optical effect. A novel acceleration detecting method was designed using optical properties of micro structure based on micro-ring resonator. Such a new accelerometer is the most promising method for its high precision, compact and other unmatched advantages.In this paper, a novel MOEMS acceleration based on a waveguide micro ring resonator on a flexible cantilever is propose and demonstrate, and this device is fabricated on a SOI wafer. Aiming to high precision acceleration, some research around micro cavities have been done in this paper. The main works are as follows. The structure of micro-ring resonator accelerometer was designed, and the relationship between the optical ring resonator and the sensitivity was analyzed. Based on finite difference time domain method (FDTD), optical properties simulation was carried out, and optimized structure of the ring resonator was obtained. Based on finite element analysis method(ANSYS), mechanical behavior of the cantilever was simulated by the static and modal analysis, and optimized structure of the cantilever was obtained.With the help of cooperation unit, the micro-ring resonator and vertical coupling gratings were fabricated. The testing system of micro-ring resonator has been set up through different experimental methods. As a high-efficiency single-cone coupling component, tapered fiber was used between external optical signal and the ring resonator-chip. The experimental result shows that: the designed micro-ring resonator has a quality factor about 103, and the measured sensitivity of 38pm/g is in accordance with our calculation. This sensitivity can be further improved by increasing the Q factor of resonator, which can be achieved by optimizing the optical and geometrical parameters of the resonator.

Related Dissertations

  1. Seismic Analysis of Three-Span Cantilever Beam Viaduct with Pounding Effects and Restrainers,U442.55
  2. Hydrodynamic Cavitation and Numerical Simulation with CFD,X703
  3. Design A Hybrid Micro-force Sensor Integrated Actuating & Sensing,TP212
  4. Hamiltonian System and Semi-analytical Method Approach to Bending Problem of Piezoelectric Cantilever Beam,O241.82
  5. Force Analysis of Bridge Pier Cap Beams Cantilever End,U441
  6. Analysis and Research on Windproof of Continuous Rigid-frame Bridge,U441.3
  7. Carbon fiber reinforced composites embedded fiber Bragg grating sensing research,TN253
  8. Study on Rock Pressure of Chang Gouyu Coal Mine Cantilever Support Working Face,TD323
  9. Research on Traveling Wave Usm Using Cantilevel Type Bending Mode Sandwich-Transducer,TM359.9
  10. Study on Stability and Critical Flow Velocity of Cantilever Pipeline Conveying Fluid with Elastic Support,U117
  11. The Influence Analysis of Stiff Skeleton on the Closure Section of the Bridge by Cantilever Construction Method,U445.4
  12. Cantilever Casting Construction Technology of Yanghe Bridge,U445.466
  13. Study on the Widening Alteration Scheme of Jiaojiang Bridge,U445.6
  14. Study on Key Technologies of Monolithic Integrated Triaxial Micro-accelerometer,TH824.4
  15. Investigation of Particle Impact Damper for Vibration and Noise Reduction with Experiment,TB535.1
  16. Slightly inclined cantilever vibration and shock loads in Reliability Analysis,TP211.4
  17. Study of the Key Technology of Hair Modeling,TP391.41
  18. The Failure Mechanism and Seismic Evaluation of Long-span Canti Lever Truss Structure under Earthquakes,TU311.3
  19. Analysis on the Out-Plane Stability of Cantilever Tube-Truss Structure,TU323.4
  20. Design and Research of a cantilever structure,TU318
  21. The Key Technology Researches on Girders’ Cantilever Construction of Extrodosed Cable-stayed Bridge with a Wide Deck,U445.4

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation components,parts > Transmitter ( converter),the sensor
© 2012 www.DissertationTopic.Net  Mobile