Dissertation > Excellent graduate degree dissertation topics show

Injection molding machine with a permanent magnet synchronous motor design and performance analysis

Author: HuangZhongCheng
Tutor: ZhangBingYi
School: Shenyang University of Technology
Course: Motor and electrical
Keywords: Injection molding machine Permanent magnet synchronous motor Temperature Design
CLC: TM351
Type: Master's thesis
Year: 2012
Downloads: 81
Quote: 0
Read: Download Dissertation

Abstract


Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  4. The Research of Women’s Underwear Design Based on Customer’s Emotional Needs,TS941.713.3
  5. Preparation and Electrocaloric Effect of BaxSr1-xTiO3 Ferroelectric Thin Films,TB383.2
  6. Measurement of the Surface Impedance of the High Temperature Superconducting Thin Films with Coplanar Transmission Line,O484.5
  7. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  8. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  9. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  10. Research on the Aiming Signal Processing of the Optical Probe Measurement System,TH74
  11. Research on Temperature Measurement Technique Based on CCD Image Sensor,TH811
  12. Development of Explosion Flame Temperature Measurement System Based on Multi-Spectral Thermometry,TH811
  13. Error Analysis and Measurement Method Design for the Hemispherical Resonator Gyro,V241.5
  14. Heat Transfer Performance of the Metallic Honeycomb and Regenerative Cooling Channel,V215.4
  15. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  16. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  17. A Study on the Strategy of Accoustic Environment Design of Underground Space Station in the City of China,U231.4
  18. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  19. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  20. The Ah Chengarchitectural Regeneration Design Research Concerned about the Jin Dynasty Culture,TU984.114
  21. The Research on the Architecture Design of Science and Technology Museum,TU242.5

CLC: > Industrial Technology > Electrotechnical > Motor > A special motor > Permanent magnet motor
© 2012 www.DissertationTopic.Net  Mobile