Dissertation > Excellent graduate degree dissertation topics show

2205 duplex stainless steel plate TMCP technology research

Author: WuMingZuo
Tutor: JiangLaiZhu;ZengXiaoQin
School: Shanghai Jiaotong University
Course: Materials Processing Engineering
Keywords: Duplex stainless steel TMCP Ferrite content Mechanical properties Pitting corrosion
CLC: TG335.5
Type: Master's thesis
Year: 2011
Downloads: 84
Quote: 0
Read: Download Dissertation

Abstract


Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of (ZrB2-ZrO2)/BN Composites,TB332
  2. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  3. Fabricationand Properties of SiC-AlN Multiphase Ceramics Prepared by Gelcasting,TQ174.62
  4. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  5. Preparation of Surface-functionalized Graphene and Its Influence on the Mechanical Properties of Nanocomposite Materials,TB332
  6. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  7. Lactic acid -based copolymer / vermiculite ceramic composites and properties of,TB332
  8. AlTi refiner for Al-Mg 2 Si composite microstructure and mechanical properties of,TG27
  9. Extrusion Mg-Al-Zn-Y alloys Low Cycle Fatigue Behavior,TG379
  10. Direct smelting crude magnesium AM50 magnesium alloy inclusions in the analysis,TF822
  11. Direct smelting crude magnesium AM60 magnesium alloy inclusions analysis,TF822
  12. Fabric softness subjective evaluation,TS101.923
  13. Reinforced steel mechanical properties of concrete structures,TU398.9
  14. ZA35 alloy elements Zr on Microstructure and Properties,TG131
  15. Ultra-high performance cement-based composites static mechanical properties and resistance to penetration performance of,TU528
  16. Rolled magnesium alloy ratcheting behavior and microstructure simulation,TG339
  17. Boron nitride fiber reinforced ceramic matrix composites through the waves and Properties,TB332
  18. Processing of SiC_f /SiC Composites Prepared with LPVCS as Precursor Polymer,TB332
  19. High - speed railway bridges mitigation and isolation,U442.55
  20. Study on Mechanical Performance of Curved Box-girder with Corrugated Steel Webs,U448.213

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal pressure processing > Rolling > Rolling process > Sheet, strip,foil rolling
© 2012 www.DissertationTopic.Net  Mobile