Dissertation > Excellent graduate degree dissertation topics show
Electrothermal chemical gun interior ballistic meshless method numerical simulation
Author: ZhuYanMing
Tutor: LiHaiYuan
School: Nanjing University of Technology and Engineering
Course: Thermal Power Engineering
Keywords: ETC guns Ballistic Two-phase flow SPH Numerical Simulation Plasma
CLC: TJ012.1
Type: Master's thesis
Year: 2012
Downloads: 36
Quote: 0
Read: Download Dissertation
Abstract
Related Dissertations
- The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
- Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
- Study on Springback of High-Strength Steel Stamping,TG386
- Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
- Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
- Experimental Investigation and Mechanism Exploration on the Degradation of N-heterocyclic Compounds with Dielectric Barrier Discharge,X703
- Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
- Study of the High Temperature Gas-Liquid Two Phase Flow Rate Proportional Conrtol Valve,V233.2
- High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
- The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
- Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
- Optical Spectrum Diagnose of Stationary Plasma Thruster Channel Wall Sputtering Erosion,V433.9
- Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
- Numerical Simulation of Biomass Direct Reburning,TK16
- Study of Effect of High Temperature Seperator on Hydrodynamices in CFB Boiler Furance,TK229.66
- Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
- Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
- Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
- Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
- Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
- Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
CLC: > Industrial Technology > Arms industry > General issues > Theoretical and Experimental > Guns and ballistics > Interior ballistics
© 2012 www.DissertationTopic.Net Mobile
|