Dissertation > Excellent graduate degree dissertation topics show

For ISO 18000-6B standard UHF RFID tag chip integrated circuit design digital systems

Author: XianLin
Tutor: ZhuXueYong
School: University of Electronic Science and Technology
Course: Communication and Information System
Keywords: RFID Digital System Low-Power Consumption Tolerance Design
CLC: TN402
Type: Master's thesis
Year: 2011
Downloads: 59
Quote: 0
Read: Download Dissertation

Abstract


RFID(Radio Frequency Identification)is one of the most promising technology in the 21th century. With the advantages of small size, high volume, flexibility and reusability, it has been widely used in all kinds of fields of manufacture and production, and been regarded as one of the fundamental technologies of the Internet of Things. Although RFID has been highly developed in abroad, it has just started up in China. And it is lack of core technologies of China’s own. So the research in this dissertation is of great significance.In this dissertation we first introduce the present situation of development in RFID technology, and look forward to the future of it. Then we analyze the principles of the RFID system and discuss the RFID internal standard-ISO/IEC 18000-6B. By this, we decide the design specification of the digital system. In order to achieve the design objective, we investigate the difficulties in digital design, including the low-power consumption, the tolerance design and the initialization of the tag ID, and propose solutions for these problems. According to the solutions, we employ a design of the UHF RFID digital system design conforming to ISO/IEC18000-6B standard. Each part of the design has passed the simulation. And the whole system has been fabricated successfully with TSMC 0.18um CMOS Mixed Signal Process. The test results of the chip meet the requirements of the design specification.

Related Dissertations

  1. Study on RFID Techniques in the Manufacture of Used in Automobile Ignition Coils,TP391.44
  2. Research on Low Power Techniques of the Instruction Fetching Unit in Embedded Processors,TP332
  3. Low-power、multi-host Interface、multi-layer Design of the LCD Controller,TN873.93
  4. RFID-based monitoring system for medical waste logistics and technology research,F252
  5. UHF dipole antenna design method,TN821.4
  6. Research on the Composite Event Query Optimization Approach for RFID Based on Automata,TP391.44
  7. Research on An Approach of Multi-queries Sharing Over RFID Event Streams,TP391.44
  8. The Design and Implementation of Bank Cash-Escort Control Management System,TP311.52
  9. RFID technology in power plant management information system,TP391.44
  10. RFID technology - based inventory management system analysis and design,TP311.52
  11. On Application of RFID Technology in University Libraries,TP391.44
  12. Research on RFID Air Interface Protocol in 2.45GHz,TP391.44
  13. The Design and Implementation of RFID Middleware Base on OSGi Framework,TP311.52
  14. AES Encryption Algorithm Implemented on RFID System,TP391.44
  15. Mining Probability Frequent Patterns to Recover Uncertain RFID Data Stream,TP391.44
  16. To Research and Realize the Reader and Transponder of RFID Based on AVR,TP391.44
  17. High Speed Deep Packet Inspection Algorithm Research Based on Hardware Support,TP393.08
  18. The Application Technology Research in the Wireless Sensor Network,TN929.5
  19. Application of Wireless Sensor Network in Agriculture Greenhouse,TN929.5;TP212.9
  20. Highway network toll optimal design and research,U495
  21. Smart Grid Application Research of Low Voltage Power Distribution,TM727

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Microelectronics, integrated circuit (IC) > General issues > Design
© 2012 www.DissertationTopic.Net  Mobile