Dissertation > Excellent graduate degree dissertation topics show

Experimental Study on the Effects of Ca-based Absorbent’s Physical Properties on Removal of NO2 and SO2

Author: LiLiZuo
Tutor: LiYan
School: Tsinghua University
Course: Power Engineering and Engineering Thermophysics
Keywords: Calcium-based absorbent hydrothermal preparation specific surface area simultaneous removal of SO2/NO2 fixed-bed reactor
CLC: X701.3
Type: Master's thesis
Year: 2008
Downloads: 117
Quote: 2
Read: Download Dissertation

Abstract


Simultaneous removal technology of NOx/SO2 by Ca-based absorbent at low temperature, which comes from the semi-dry desulphurization process, is paid some attention by scientists because of its low water consumption, cheap absorbent, simple scrubbing system and easy disposal of by-products, etc. However, now it is still in the fundamental research stage due to its low NOx removal efficiency and low calcium utilization. The thesis studies the effect of preparation conditions for hydrothermal reaction of Ca（OH）2 with fly ash on the physical properties of Ca-based absorbent, and investigates the NO2/SO2 removal efficiency by the newly hydrated Ca-based absorbent in a fixed-bed reactor and its reaction mechanism.In the process of hydro-preparation, hydration temperature、hydration time、ratio of fly ash to Ca（OH）2、ratio of solid to liquid and dry temperature will have strong influence on the specific surface area（Sg） and porosity structure of the Ca-based absorbent. The experimental results show the high specific area and good porosity structure of the absorbent can be achieved under the condition of higher hydration temperature、longer hydration time、appropriate ratio of fly ash to Ca（OH）2, ratio of solid to liquid and lower dry temperature. It is found in the simultaneous removal experiments of NO2/SO2 that the Ca-based absorbent with higher specific area Sg and rich porosity structure will have the better capture activity in general.Furthermore, it is observed in the research that the specific area Sg and the pH value over the absorbent are two crucial factors affecting the NOx removal efficiency, especially having a close dependance to release of NO in the initial period of denitrification process. The larger Sg and higher pH value can enhance the simultaneous removal of NO2/SO2 and reduce the release of NO in the initial denitration period. However, the method to increase the pH value of Ca-based absorbent by addition of NaOH in the solution reduces the removal efficiency of SO2/NO2 in total and especially of NO2 due to the decrease of specific area and change of porosity structure. On the contrary, the addtion of solid NaOH into the Ca-based absorbent hydrated by fly ash and Ca（OH）2 can enhance the removal effect of SO2/NO2.Reaction temperature plays an important role in the exclusive removal of NO2. Under the constant relative humidity the denitrification efficiency will decrease at first and then increase with reaction temperature rise.

Related Dissertations

  1. Study of Simultaneous Desulfurization and Denitrification with Calcic-Based Absorbent in a Fixed Bed,X701.3
  2. Preparation of high surface area activated carbon , forming and preliminary application,TQ424.1
  3. Estimation Model of Asphalt Content for SAMPAVE Stress Absorbing Layer Mixture,U414
  4. Study on Process Analysis and Oil Absorptive Properties of Kaolin Modified by Acid and Alkali,TD985
  5. The Investigation on the Catalytic Dehydrogenation of Propane to Propylene,TQ221.212
  6. Preparation and storage of the electrode material for electrochemical capacitors electrical properties,TM53
  7. Experimental Investigation on Reaction Characteristics for Magnesium Residues as Sorbent,X701.3
  8. Numerical simulation and analysis of the flow and temperature fields in the axial fixed bed reactor,TQ018
  9. Study on Clean Catalytic Oxidation of Cyclohexene to Adipic Acid,TQ225.146
  10. Study on the Manufacturing of Concrete Aggregates by Using Desert Sand,TU528
  11. Capacitance adsorption studies concentrated seawater,P746
  12. Study on Synthesis, Character and Properties of Carbon Nanomaterials,TB383.1
  13. Low-Temperature Synthesis and Properties of Porous Boron Nitride Nanomaterials,TB383.1
  14. Whole Process Simulation of Propylene Hydratin to Producing Isopropanol,TQ223.123
  15. Preparation of a Carbon-based Solid Acid Catalyst with Hign Specific Surface Area by Biomass Wood Powder,O643.36
  16. Mesoporous Al_2O_3, AlF_3 Pd/Al_2O_3 catalyst preparation and properties of catalytic combustion of methane,O643.36
  17. Study on Cr-based Catalysts for Vapor-phase Fluorination to Synthesis CF4 and Preparation of β-AlF3 with High Surface Area,O643.32
  18. Study on the Preparation and Gas Sensing of SnO2 Nano-material,TN304.21
  19. Preparation and characterization of solid solution of cerium iron,O614
  20. Preparation of Porous Ion-exchange Material and its Characteristics of Removal Ammonium,X703
  21. Preparation of Heteropoly Acid/Molecular Sieve Catalyst and Catalytic Reaction of Oxidative Coupling of Methane,O643.32

CLC: > Environmental science, safety science > Processing and comprehensive utilization of waste > General issues > Exhaust gas processing and utilization > Desulfurization and desulfurization
© 2012 www.DissertationTopic.Net  Mobile