Dissertation > Excellent graduate degree dissertation topics show

The In-situ Synthesis of CNTs Reinforced Titanium Matrix Composites by Chemical Vapor Deposition

Author: WangYing
Tutor: ZhaoNaiQin
School: Tianjin University
Course: Materials Science
Keywords: CNTs Tatinium matrix composites in-situ CVD powder metallurgy friction and wear
CLC: TB383.1
Type: Master's thesis
Year: 2008
Downloads: 187
Quote: 2
Read: Download Dissertation

Abstract


Carbon naonotube (CNT) is a kind of important reinforcement in metal matrix composites because of its high module, high strength and outstanding physical performance. It is significant that exploring new manufacture technique for CNTs reinforced titanium matrix composite and investigating the effect of CNTs on the properties for developing the CNTs’application fields and improving titanium alloy capability.In the thesis, a new Ni/Ti catalyst was prepared through deposition-precipitation method. Then, the CNTs/Ti composite powder was synthesized in-situ on titanium powder with the Ni/Ti catalyst by chemical vapor deposition (CVD) process. The influence of the processing parameters, such as the content of catalyst, reduction temperature, CNT synthesis temperature, carrier gas category and the radio of methane to carrier gas, were investigated. The growth mechanism of CNTs on the new Ni/Ti catalyst during CVD was discussed. The results indicated that the processing parameters including the content of catalyst and CNT synthesis temperature have a important influence on the growth of CNTs. The CNTs with even morphology, high yield and purity can be synthesized by methane decomposition when the content of catalyst is 3wt% and the synthesis temperature is 550℃. As a result, the aim of this experiment for preparing CNTs on titanium powder using in-situ CVD process has been achieved, which points out a new method for CNTs/Ti composites manufacturing.Furthermore, The CNTs/Ti composite bulks were prepared by powder metallurgy process with the synthesized composite powder. The density and hardness of the CNTs/Ti composite bulks were tested. The Friction attrition experiment was carried out on CNTs/Ti composite bulks in a dry grinding condition. The results show that the CNTs/Ti composite has better wear resistance performance than titanium bulk. Along with increasing of friction time and load, the width of wear markers of the CNTs/Ti composite and titanium bulks were both increased, but the wearing degree of CNTs/Ti composites changed much slowly than that of titanium bulk. The Friction characteristic of the CNTs/Ti composites includes grain abrasion, oxidative abrasion and so on.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Study in Situ on Rat Intestinal Absorption Mechanism of Bazhen Decoction,R285
  3. Identification of Cyto-and Molecular Genetics of Multisomic Addition Line "Nj08-063" in Brassica Napus and Its Agronomical Traits,S565.4
  4. Preparation and Property Study of Polyaniline/Polyester Composite Conductive Fabric,TS195.6
  5. Detection of Paenibacillus Polymyxa by Fluorescent in Situ Hybridization and Its Application in Pig Slurry Compost and Soil,S144
  6. Studies on the Preparation of 20% Chlorpyrifos CS and Its Analytic Methods,S482.3
  7. Molecular Cytogenetic Identification of Small Fragment Translocation Line Involving Chromosome Arm 6VS of Haynaldia Villosa,S512.1
  8. Molecular Cloning and Analysis of Expansin Gene from Heterodera Glycines and Evaluation of Soybean Germpalsms Resistance,S565.1
  9. Transfer and Transformation of Cu in Black Soil-Crop System and In-sit Immobilization Mechanism,X53
  10. Preparation of Baicalin-loaded Liquid Suppository and the Evaluation of in Vitro-in Vivo Characteristics,R283
  11. The Correlation between the Intraocular Lens Power and the Myopia before and after Excimer Laser Surgery,R779.63
  12. The Effects of Ezetimibe Combined with Fluvastatin in Cardiovascular Disease of Lipid Lowering Therapy and the Evaluations of Anti-inflammatory Responses,R541.4
  13. Long-Term Clinical Evaluation of Laser in Situ Keratomileusis for Myopia,R779.63
  14. Growth of Single-walled Carbon Nanotube Arrays and the Study of Their Adhesion Force,TB383.1
  15. Study on the Association of Obstructive Sleep Apnea/ Hypopnea with Risk Factors of Cardiovascular Disease,R54
  16. Tribological Characterization of Uhmwpe Loaded with Alendronate Sodium in Ball-on-Disc Test,TQ325.12
  17. Study on PMT Preparation, Structure and Performance of NiCoMnIn Alloy Foam,TG139.6
  18. The Preparation, Microstructure and Propertities of the New Type 3D-Meshy SiC/Cu-Fe Composite Material,TB33
  19. The Deformation Law and Its Influnecing Factors of Iron-based Valve Plate in Sintering Process,TF124.5
  20. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  21. Reaction Sintering Preparation of Titaniferous Compound Ceramic Composites by Two-step Method,TQ174.1

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile