Dissertation > Excellent graduate degree dissertation topics show

Study of Electroless Plating of Nano-doping AgSnO2 Electrical Contact Materials

Author: LvJian
Tutor: ZhengJi
School: Tianjin University
Course: Materials Science
Keywords: AgSnO2 contact materials electroless plating reductant
CLC: TQ153.1
Type: Master's thesis
Year: 2008
Downloads: 73
Quote: 0
Read: Download Dissertation

Abstract


Electrical contacts are the contact components of the electrical switches and instruments. Its main burden is the disconnection of the circuit, which strongly affects the performance of the reliable operation of electrical switches and life. Extremely complex phenomenon will occur during the process of opening and closing in the circuit, and many factors will affect it. The ideal electrical contact materials must have good physical properties, electrical contact performance and processing performance. Current research shows that, AgSnO2 contact material is an ideal subtitute of AgCdO. But there are also some weaknesses in it, for example, large contact resistance, high temperature rise and poor processability.In this paper, we prepared doped Bi-SnO2 nano powder by using the Sol-Gel method, and analyzed the SnO2 crystal transition temperature through the DTA-TG and X-ray diffraction analysis. According to microscopic analysis, it was shown that the distribution of SnO2 powder was homogeneous with their particle sizes about 10 nm. Then we researched the electroless plating process of nano-particles SnO2 and investigated the influence of temperature, reductant and concentration to the electroless plating process. It was found that best reductant is glucose, the best temperature is 60℃and the best concentration is 0.6 Mol/L.Then, through the X-ray diffraction analysis（XRD）, scanning electron microscope （SEM） and energy spectrum analysis, the relationship between the component and microstructure of the electroless plating powder was investigated, and the formation mechanism of metal plating was clarified from the perspective of a redox.We prepared the nanometer doping AgSnO2 contacts by powder metallurgic process and test their density, rigidity, strength of compress. Then we compare the performance of AgSnO2 contacts that we prepared to GB. The result indicated that the performance of our contacts is much better than GB.

Related Dissertations

  1. Preparation of Electroless Plating on Heat Transfer Surface with Low Surface Free Energy and Study on Their Anti-fouling Property,TK172
  2. The Preparation of Metallic Fabrics with PD-Free Activation and Research of Its Properties,TS106
  3. The Effect of Pd Doping and Chemical Pd-plating on the Electric-Magneto Transport Properties in LCSMO System,O482.5
  4. Reduction of copper slag blowing mechanism and Numerical Simulation Study,TF811
  5. Study on the Technics Structure and Performance of Compound Processing of Gas Multi-Elements Peneterting and Electroless Plating,TG156.8
  6. The Preparation of Cenosphere Composite Absorbent,TB34
  7. Electroless Deposition of Ni-W-P Coating on AZ91D Magnesium Alloy,TQ153.1
  8. Pneumatic conveying of granular reductant nature and automatic injection system,TH232
  9. The Preparation and Characterization of Metal/Conducting Polymer on Surface of Fabric,TS195.5
  10. The Study of Electroplating Pretreatment on AZ91D Magnesium Alloy,TQ153
  11. Mussel-Inspired Biomimetic Surface Functionalization and Metallization of XNBR and Graphite,TQ333.7
  12. Study on Electroless Plating Ni-Co-P Alloy Protection Deposit of Sintered NdFeB Permanent Magnet Material,TG174.44
  13. Study on Carbon Fiber Reiforced Ni Matrix Plate Made by Plasma Spraying,TB332
  14. Preparation and Properties of Nb-Ti-Ni Alloys Membranes for Hydrogen Permeation Properties,TG146.15
  15. Condensation of Bromamine Acid with Amines Catalyzed by an Environmentally Friendly Catalyst System,TQ203.2
  16. Preparation of Noble Metal Monolithic Catalysts by Electroless Plating and Their Application in Toluene Catalytic Purification,O643.36
  17. Preparation of Composite Coating and the Corrosion Resistance for AZ91D Magnesium Alloys,TG174.4
  18. Chemical Plating Preparation of Fe/Al Composite Powder and Study on Microstructure of Its Laser Coatings,TG174.4
  19. Nickel boron / micron / nano composite plating process and its coating performance,TG174.4
  20. Studies on the Fabrication and Applications of Film Reference Electrode on Microfluidic Chips,O657.1

CLC: > Industrial Technology > Chemical Industry > Electrochemical industries > Electroplating industry > A single metal plating
© 2012 www.DissertationTopic.Net  Mobile