Dissertation > Excellent graduate degree dissertation topics show

Study of Digital Control System of Pulsed MIG Welding Power Source Based on Double-processer

Author: HeBinHua
Tutor: HuShengZuo
School: Tianjin University
Course: Materials Processing Engineering
Keywords: Pulse DSP MCU MIG Digital welding power Dual-processor
CLC: TG434
Type: Master's thesis
Year: 2008
Downloads: 96
Quote: 3
Read: Download Dissertation

Abstract


Pulsed MIG Welding is widely used in the industry. Compared with Direct Current MIG Welding, Pulsed MIG Welding has many advantages, such as wide range of current, controllable heat input and full position availability. Digital control is flexible and has better stability and higher precision. Digital technology used to control Pulsed MIG Welding has become the focus of academia. Therefore, this paper is aiming at Digital Control System research through theoretical analysis based on MCU and DSP.On the basis of droplet transfer analysis in Pulsed MIG Welding, the corresponding control is brought and the double-L power output characteristic control is designed. Digital control system model of Pulsed MIG Welding is set up and the hardware of welding power source control system based on MCU and DSP, including current feedback circuit, voltage feedback circuit and double PWM output isolation circuit. Besides, the numerical system model and the model for simulation are built. Optimal parameters range is obtained by MATLAB simulation. In CCS programming environment, the main program of Pulsed MIG Welding is prepared, as well as the program of arc procedure, arc subroutine, normal welding and PI control.The characteristics of dual-pulse welding is analyzed and the dual-pulse MIG Welding program is designed on the basis of single Pulsed MIG Welding.Experiments indicate that the digital control system has fine practicability. The whole system is able to achieve the double-L power output characteristic control and droplets transition mode control.

Related Dissertations

  1. Design of Electronicalcontrol System for Electronic Jacquard Knitting Machine,TS183
  2. Research on the Integrated Grating Subdividing Digital Display Device Based on DSP,TH822
  3. Study on Two Dimensional of Auto-Collimator Based on DSP,TH741.14
  4. Study on the Control System for Automatic Aiming of HWIL Pitching Mechanism,TJ303
  5. Research on Synchronous Motor Excitation Control System,TM341
  6. Study on the Echo Processing Method for the Measurement of Wire Length Based on Pulsereflection,TM247
  7. The AES Algorithm and Its Implementation in DSP,TN918.1
  8. The Design of a DSP-Based Robot Speech Command Recgnition System,TN912.34
  9. Research on Signal Receiving System of Phase Laser Range Finder,TN249
  10. Study on Implementation Technology of Channel Estimation in OFDM System Based on DSP,TN919.3
  11. Research on the Topologies of Polarity-Variable Micro Oxidation Pulse Power,TN86
  12. Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
  13. Voice Signal De-noise Base on Wavelet and Arithmetic Implement with DSP,TN912.3
  14. Design and Processing of Hybrid Modulated HF Radar Waveform,TN958.93
  15. Research on Image Compression and Implementation Using TMS320C6713 Based on SPIHT Algorithm,TP391.41
  16. Research on Feature Extraction and Classification of Pulse Waveform for Cholecystitis and Nephrotic Syndrome Diagnosis,TP391.41
  17. A Study on the Technology of the Infrared Image Matching,TP391.41
  18. Development of 3-Dimensional Scanning Probe Data Acquisition System Based on DSP,TP274.2
  19. Development of Vxibus Common Interface Module Based on DSP,TP274
  20. Greenhouse air source heat pump heating systems,S625
  21. Research of Acoustic Signal Acquisition System Based on DSP,TP274.2

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding equipment > Arc welding equipment
© 2012 www.DissertationTopic.Net  Mobile