Dissertation > Excellent graduate degree dissertation topics show

Control Technology of Stepper Motor Driver and Its Design for Applications

Author: ChenZhiCong
Tutor: GuoDongHui
School: Xiamen University
Course: Circuits and Systems
Keywords: Stepper Motor Sinusoidal Subdivided Driving Motion Control
CLC: TM383.6
Type: Master's thesis
Year: 2008
Downloads: 1586
Quote: 10
Read: Download Dissertation


Stepper motor is a kind of electromechanical component that can turn electrical pulse into mechanical angular displacement or linear displacement. Associated with servo systems, it can achieve good positional accuracy without complicated feedback loops, are easy to control and of high cost performance, have no accumulative error. Thus stepper motor is widely used in economy numerical control positioning system. In this thesis, we first introduce the characteristic, structure, working principle of stepper motor. After that, we adopt MCU to develop several drivers for stepper motor. At last, we apply the stepper motor to the system of automatic microscopic IC photo taking.In this thesis, we develop several projects about the stepper motor as following:(1) Testing instrument for 2 phase permanent magnet stepper motor.The instrument adopts driving method of constant voltage and has fixed frequency, variable frequency, trigger and endurance four kinds of test modes. Its working parament can be set via the man-machine interface constituted by button and LCM.(2) 5 phase hybrid stepper motor driver. The driver adopts driving method of constant total current chopped wave, can make the motor work more smoothly and output higher torque.(3) 3-dimensional subdivided driver for 2 phase hybrid stepping motor.The dirver adopts driving method of sinusoidal subdivided constant current chopped wave, can drive 3 stepping motors simultaneously.(4) CAN-RS232 and USB-RS232 transparent protocol conversion modules.These two modules can be used to update the communication method from master-slave mode based on RS485 to multi-hosting mode based on CAN. By this way, the real-time capability of communication can be improved observably without changing the RS232 interface.(5) Automatic microscopic chip photo taking system.The hardware section of the system mainly consists of 3-dimensional subdivided driver, motorized translation stange, microscope, CMOS camera and computer.

Related Dissertations

  1. Several Key Issues on Closed-Loop Control for Precision Laser Tracking Device,TN249
  2. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  3. Research and Application of Bilateral Driven Synchronized Motion Control Based on PMAC Motion Control Card,TN05
  4. Based on DSP and CPLD design and implementation of motion control card,TP273
  5. Multi-module based on passive joints mobile micro- robot design and motion control,TP242
  6. Automatic dual-axis solar tracking independent control system design,TM615
  7. Method of Stepper’s Acceleration and Deceleration Based on CPLD,TM383.6
  8. Research on Key Technologies of Automotive Combined Instrument,U463.7
  9. A Design of a Driven System for an Adaptive Wing Based on Stepping Motor,V224
  10. Research on the Control System of Stage with Gas-Lubricated Bearings,TH703
  11. Research for Online Automatic Measuring System on Centerless Grinding,TG581.3
  12. Based on Researching of Computer-controlled Automatic Welding Machine of Aluminum Bus,TG409
  13. Research on Control Method of Coordinated Motion for Hexapod Robot Based on CPG,TP242.6
  14. Research on Servo System Based on SERCOS Bus,TP273
  15. Scrap car removal robot working head motor control technology,TP242.2
  16. Embedded mobile robot obstacle avoidance driven systems development and implementation,TP242
  17. Design and Research of automatic tracking solar concentrator device,TK512
  18. Based on the design of FPGA- two-phase hybrid stepping motor drive control system,TM383.6
  19. Flexible fixture parallel kinematic Control System,TG75
  20. Image sensor based closed-loop solar tracking controller Research and Implementation,TP273
  21. Research of Control System of the Aspherical Liquid Lens and Lens Array Fabrication Platform,TP273

CLC: > Industrial Technology > Electrotechnical > Motor > Micro-motor > Control of micro motor > Stepping decline of motor
© 2012 www.DissertationTopic.Net  Mobile