Dissertation > Excellent graduate degree dissertation topics show

Research on Control System of Multi-motor Synchronous Operation Based on Fuzzy Control

Author: LiuBo
Tutor: ZhangDanHong
School: Wuhan University of Technology
Course: Control Theory and Control Engineering
Keywords: bottle forming machine permanent magnet synchronous motor synchronization control fuzzy PID CAN bus
CLC: TM306
Type: Master's thesis
Year: 2009
Downloads: 400
Quote: 4
Read: Download Dissertation

Abstract


Multi-motor Synchronization Control System has been widely used in various fields in recent years, for the rapid development of transmission system. In order to improve the performance of multi-motor synchronization control system, as well as to meet some specific accuracy requirements, the research of multi-motor synchronization control system has attracted extensive attention. This paper takes a automatic bottle making system as research background, and a kind of multi-motor synchronization control system based on permanent magnet synchronous motor and frequency converter has been designed according to the production line process and its function.The multi-motor synchronization control system designed is mainly composed of PC, synchronization controller and inverter. The synchronization controller generates a common reference signal independently tracked by each motor with certain setting time differences.The synchronization controller communicates with PC and electronic timing system by using CAN bus. The serial data frames are sent to the inverter to change the motors’ speed through RS-485 bus, when the microcontroller calculates the expected frequency value by fixed-point optimal PID algorithm, after filtering out the interference ,which is mixed in the position signal detected by proximity switch. The operation practice proves that the system, whose precision is less than one degree, has a good rapid response and stable characteristics. The system well achieves the goal of synchronization control. The motors are able to orderly cooperate with each other for automatic production.Firstly, the thesis designs the general design plan of synchronization control system for certain I.S. forming machine on the basis of analyzing requirement and process of I.S. forming machine as well as discussing the necessity of synchronization control. Secondly, the design of hardware circuit, which is around the PIC microcontroller, is discussed. Thirdly, the software of synchronous control system is designed according to the thought of foreground/background modular programming. The main thought and block diagram of the program are provided. Finally, MATLAB is used to simulate the operation of control system, since the approximate model is established.A Kind of engineering application method to detect the jump of synchronous signal, which is delivered by synchronization controller, is proposed. This method, instead of the traditional one, is effective in reducing the possibility of adding or losing position pulse, because the position signal is irregular in speed regulation. Both the anti-interference ability and stability of the system are improved. The synchronization control system we designed has been put into practice in several companies and operates steadily.

Related Dissertations

  1. Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
  2. The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
  3. Study on the Locomotive Dynamic Supervision System,U284.48
  4. The Inductive Load Based Vehicle Body Network Control System,U463.6
  5. The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
  6. Parameterization Design and Research of Permanent Magnet Synchronous with Fractional-slot and Concentrated Winding,TM341
  7. Research on High Efficiency Interior Permanent Magnet Synchronous Motor,TM341
  8. Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
  9. Research on Temprature Controling Technology of Laser Diode with Thermoelectric Cooler,TN248.4
  10. Research on High-Performance Computer I/O Bus,TP336
  11. Development of High Speed Data Acquisation and Playback Module Based on PCI Express Bus,TP274.2
  12. Development of the Digitizer Based on PCI-E Bus,TP274.2
  13. Research on Temperature Control System for Laser Diode,TP273
  14. Design of LXI 1553B Bus Communication Module,TP273
  15. Optimal Synchronization Control of a Class of Underactuated Lagrangian Systems,TP13
  16. Design and Study of Temperature Chamber Control System in Servo Table,TP273
  17. Design of the Main Controller in Automotive Body Network Control System,TP273
  18. Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
  19. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  20. Research and Design of Web Reports Based on Service-Oriented Architecture,TP393.09
  21. The Research of Control System of Permanent Magnet Synchronous Motor Based on DSP,TM383.42

CLC: > Industrial Technology > Electrotechnical > Motor > General issues > Motor test,run
© 2012 www.DissertationTopic.Net  Mobile