Dissertation > Excellent graduate degree dissertation topics show

Experimental Studies and Theoretical Analysis of Steel Plate ShearWall with Slites

Author: ChenYongHao
Tutor: ChenZhiHua
School: Tianjin University
Course: Structural Engineering
Keywords: Steelshearwallwithslites MemberofResistshearforce Cylic-loading Buckling Hysteresis property High-strength bolts
CLC: TU391
Type: Master's thesis
Year: 2008
Downloads: 125
Quote: 2
Read: Download Dissertation

Abstract


The steel-plate shear wall with slites is a kind of structural member which canresist shear force. Because of its good performance,it has been applied abroad, but theresearches are just started in China. A new type of earthquake-resistingelement ,consisting of a steel plate shear wall with vertical slites,is introduced.In thesystem,the steel plate segments between the slites behave as a series of flexurallinks,which provide a fairly ductil response.By taking the steel-plate shear wall with slites as the research object, the maincontents of This dissertation are listed as follows:1. the development status of the the steel structure residence, the steel plate shearwall with slites and its application in steel structure residence , characteristic analysisand the disadvantage of the different kinds of steel plate shear wall were introduced.And the main work was presented.2. According to the finite element analysis and the studies of the steel plateshear walls with slites at home and abroad, establish a detailed test scheme and makeexperimental studies. The test results,provide data on general behavior of the walls,are presented for two wall plate specis of roughly full scale, which were subjected tocyclic lateral loading. When properly detailed and fabricated to avoid prematurefailure due to tearing or out-of-plane buckling,the wall panels respond in a ductilemanner.3. Based on the test results,the dissertation analyzes the force condition of thehigh strength bolts before slipped,which can provide theoritical reference for thearrangement of bolts in the design.4. To contrast the analysis of the finite element、Hitaka theoretical formula withthe test results. Through the research of the steel shear wall with sltes under cylicloading, the ultimate load-carrying capacity and hysteresis property is found.5. Parameter analysis of static behaviors and hysteresis behaviors of thesteel-plate shear walls with slits by finite element software ANSYS are made.6. several problems of outer-shell connections which needed researched moredeeply were put forward.

Related Dissertations

  1. The Ultimate Load Capacity Analysis of Power Transmission Tower Structures,TM753
  2. Cold-formed steel channel column curling research,TU392.1
  3. Based on analysis of buckling restrained brace simulation and experimental study,TU317
  4. Folding Analysis of Elastic Memory Composite Thin Sheet,O343
  5. The Buckling and Postbuckling Analysis of Flat Composite Stiffened Panels Loaded in Axial Compression,TB332
  6. Preparation of composite honeycomb sandwich structure and mechanical properties of,TB332
  7. The Study on the Effect of the Lateral Braces on the Out-of-plane Stability of Circular Arches,TU391
  8. Study on Interactive Buckling and Post-Buckling of Thin-Walled Lipped-Channel Beam with Web’s Stiffeners,TU392.1
  9. Larry C steel roof of the seismic performance of,TU392.5
  10. Research on Elastic-plastic Buckling and Crashworthiness of Thin-walled Metal Tub,TU392.3
  11. Theoretical Analysis and Experiment Study on Buckling-Restrained Brace,TU352.11
  12. Study of Effective Length Coefficient of Frame Column with Semi-Rigid Connections,TU391
  13. Researches on the Direct Methods in Calculating Vertical Capacity of Cold-formed Steel Columns,TU392.1
  14. Experimental Study and Theoretical Analysis of Concrete Filled Steel Tubular Column-to-Truss Through Bolts-End Plate Connections,TU398.9
  15. The Energy Dissipation Principles and Seismic Design Method of Steel Beam’s High-strength Bolted Splice in Steel Frames,TU391
  16. The Simulation on Mechanical Property of Carbon Nanotube Torsional Deformation and Thermal Stability of Oscillatingtube,TB383.1
  17. Structural Behaviors Research of Extradosed Bridge with Corrugated Steel Webs Girder,U448.27
  18. Tall steel buckling restrained brace optimize energy dissipation arrangement,TU973.13
  19. CFST Column buckling restrained brace composite frame Experimental study on seismic behavior,TU398.9
  20. High intensity zone structure energy dissipation design,TU352.1
  21. Application Study of Buckling-Resistant Braces in Reinforcement,TU352.1

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Steel
© 2012 www.DissertationTopic.Net  Mobile