Dissertation > Excellent graduate degree dissertation topics show

Research on Working Equipment Potential Energy Recovery System of Hydraulic Excavators

Author: LinMingRun
Tutor: GuanCheng
School: Zhejiang University
Course: Mechanical Design and Theory
Keywords: hydraulic excavator differential flow distribution energy recovery energy-saving control
CLC: TU621
Type: Master's thesis
Year: 2012
Downloads: 184
Quote: 0
Read: Download Dissertation

Abstract


To improve fuel economy as well as environmental performance of 23t traditional excavators, a scheme of boom potential energy recovery was proposed, considered energy saving technology as an important field of mechanical engineering research. The main design parameters of working equipment potential energy recovery were analyzed, and the virtual prototyping and the mathematic models of hydraulic components were established. Based on the approach that flow distribution is derived from the outlet differential pressure between main power source and auxiliary, an applicable control strategy of the hydraulic excavator was employed to satisfy the load power requirements, which took into concern of the recovery and reuse of working equipment potential energy. The simulation results manifested that the raise of energy utilization ratio was noticeable, while the operating and power performances were preserved. What’s more, the importance and a good prospect of the system were reflected. The paper was divided into the following sections:(1) The research background and significance of the potential energy recovery system in hydraulic excavators were introduced. And based on the present study, the content and key points of this paper were drawed.(2) Comparatively analyzed the energy savings and economics among different options, the system was determined and designed, meanwhile, system components were selected and matched to full play the performance and improve the efficiency.(3) Based on the comprehensive constant-power and negative-flow control performance, the mathematic models of working devices and hydraulic components were built, which laid a good foundation for the further study of control strategy.(4) According to the key control parameters, an applicable control strategy of the hydraulic excavator was employed to optimize the energy efficiency, approaching that flow distribution is derived from the outlet differential pressure between main power source and auxiliary. The simulation results manifested that the raise of energy utilization ratio was noticeable, while the operating and dynamic performances were preserved, which verify the feasibility of the control strategy. (5) The hydraulic system of test bench was designed, meanwhile, the system function, working principle, structure and layout were described, providing a good foundation for the (?)ther study.

Related Dissertations

  1. The Virtual Prototype Modeling of WYL50 Excavator and the Dynamic Simulation and Mechanics Research on Work Device,TU621
  2. Cold Energy Recovery and Its Applications Research of Natural Gas in the City Gate Station,TU996
  3. Study on Utilization of Cold Energy of Exhaust Air in Air Conditioning Systems,TU831.4
  4. Compound braking efficiency regenerative braking system stability and energy efficient recovery of,U463.5
  5. Hydraulic excavator slewing brake energy recovery system research,TU621
  6. Supercapacitor-based energy technology research and implementation of the elevator,TM92
  7. System Simulation and Analysis of Hydraulic Excavator’s Working Device,TU621
  8. The Control Research and Design on Energy Recovery System of Automotive Transmission,U467.5
  9. The Study of Backhoe Equipment of the Hydraulic Excavator,TU621
  10. Research on Aerodynamic Performance of Air to Air Energy Recovery Equipment,TU831.6
  11. Study the Internal Combustion Engine Exhaust Energy Recovery Technology Based on Stirling Cycle,TB651
  12. Research and Application of the Throttling Grooves on Multi-Way Valve Spool of Mini-Hydraulic Excavator,TU621
  13. The Study on Elctric Vehicle Breaking Energy Recovery System,U463.5
  14. Design and Simulation of Hydro-Mechanical Continuously Variable Transmission,TH132.46
  15. Design of Energy-Recovery Test System of Lithium-Ion Battery,TM912
  16. Research on Energy-Saving Character of Hydraulic Excavator’s Rotation System Based on Energy Recovery and Reuse,TU621
  17. The Design and Experiment Research on Hydraulic Excavator Trajectory Control System,TU621
  18. Research on Application Effect of Air to Air Energy Recovery Equipment in Severe Cold Regions,TU831
  19. The Mechanical-Hydraulic Co-Simulation and Study of Hydraulic Excavator Working Device,TU621
  20. Piezoelectric Wind-energy-harvesting Device with Reed and Resonant Cavity,TK8
  21. Study on the Scheme and the Numerical Simulation of the Heat and Energy Recovering System for Electrically Calcined Furnace of the Carbon Factory,TK115

CLC: > Industrial Technology > Building Science > Construction machinery and equipment > Earthwork machinery, mining machinery > Excavator
© 2012 www.DissertationTopic.Net  Mobile