Dissertation > Excellent graduate degree dissertation topics show

Simulation and Experimental Study on the Scattering Properties of Two Dimensional Rough Surfaces

Author: MuZuo
Tutor: XieMing;XiaXinLin
School: Harbin Institute of Technology
Course: Engineering Thermophysics
Keywords: scattering properties surface topographic roughness Bi-Directional Reflectance Distribution Function (BRDF)
CLC: TP391.41
Type: Master's thesis
Year: 2008
Downloads: 189
Quote: 1
Read: Download Dissertation


Light scattering is one of the most important natural phenomenon, and has very wide range of applications. In this dissertation, light scattering from rough surfaces is systematically investigated by numerical simulation and experiment. Main research works are as follows:1. Based on geometric optics approximation, light scattering from two dimensional rough surfaces was simulated by Monte Carlo method, considering the shadowing effect of incidence and the multiple reflections, also with the depolarization in surfaces scattering, the traditional ray-tracing algorithms are improved.2. Scattering properties of some typical materials were investigated by experimental measurements: first we learned the surface scattering properties of satellite coating; then analyzed the temperature affect on the scattering properties of Cu, PTFE and graphite; the bidirectional reflectance function (BRDF) of granite with dry/wet surfaces were measured in BRDF experimental device, results show that the BRDF of granite is largely affected by the dry/wet status, and there exits obviously mirror reflection component when the surface is wet.3. Characteristics of real surfaces were analyzed according to the surface topographic data, measured using an atomic force microscope (AFM) for a rough granite surface. Height distribution of real surface is not completely Gaussian, showing slightly anisotropy. The surface topographic data are implanted into Monte Carlo method to model the in plane BRDF at the wavelength of 0.6328μm, the modeling results were compared with the measurements, we can get reasonable agreement between them.4. Several factors: wavelength, shield, multiple reflections and distribution of local incidence angles that affected the emissivity of rough surface were systematically investigated. Research shows that: emissivity of ideal plane is determined by incidence angles and physical characteristics of the medium; emissivity of rough surfaces will be changed because of the multiple reflections; the shield probability may be affected by the change of incidence angles and roughness, which lead to the change of multiple reflections and the distribution of local incidence angle, variety of factors working together result in the emissivity of rough surfaces showed increase after the first decrease with the increasing incidence angles and increase with the increasing roughness.Scattering properties of rough surfaces are studied throw numerical simulation and experimental measurements, the main factors that affected light scattering from rough surfaces are systematically analyzed and discussed.

Related Dissertations

  1. The Effect of Different Microwave Polymerizations on Accuracy and Physical Properties of Denture Base Resin,R783.6
  2. Comparison of the Physical and Mechanical Properties Among Four Kinds of Die Stone Casts,TQ177.3
  3. Psychoacoustic parameters of algorithms and programming,TP311.1
  4. Nuclear Power Plant Steel Milling Surface Integrity Study,TG54
  5. Transparent substrate surface scattering and volume scattering studies,TH74
  6. ABS -based high-speed milling of aluminum hydraulic valve Processing Research,TG54
  7. Nickel microlens array mold core micro electroforming process and surface quality,TH74
  8. Research on Image Segmentation Based on Rough Set Theory,TP391.41
  9. The Analysis of Momentum Fluxes and Marine Atmospheric Boundary Turbulence Characteristics,P732
  10. Substrate Surface alloying coating microstructure and properties of hot dip galvanized sheet,TG174.44
  11. An Investigation into the Precision Micro-hole Enlargement by Using Electrochemical Grinding,TG662
  12. Effect of the Rubbing and Wearing Behavior of Steel Rail by Ultrasonic Peening,TG115.58
  13. Research on Key Technologies of Three-dimensional Surface Roughness Measurement,TG84
  14. The Multi-parameter Disquisition of High-speed Grinding Which Is Based on Minimum Quantity Lubrication Cooling Method,TG580.6
  15. Experimental Study on Basic Mechanical Properties of Domestic Carbon Fiber Renforced Plastic,TB332
  16. Automotive engine piston pin anti- friction and wear properties of,U464.13
  17. Influence of Surface Roughness on Gold Alloy and Ni-Gr-Ti Alloy on Adhesion Bacteria,R783
  18. Influence Research of the Different Expansion Coefficient Plaster Cast Material on Resin Denture Accuracy and Physical Properties,R783.6
  19. A Study on Hairy Pads of Drosophila Melanogaster and Its Adhesive Force on Touched Surfaces with Different Roughness,Q811
  20. Research on Speckle Suppression in Laser Micro-Projector,O436

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Pattern Recognition and devices > Image recognition device
© 2012 www.DissertationTopic.Net  Mobile