Dissertation > Excellent graduate degree dissertation topics show

Automatic Control in P3 Laboratory

Author: HanGang
Tutor: LouChengZhi
School: Tianjin University
Course: Heating,Gas Supply, Ventilation and Air Conditioning Engineering
Keywords: P3 Laboratory Control System Digital PID Negative Pressure
CLC: TP273
Type: Master's thesis
Year: 2008
Downloads: 42
Quote: 0
Read: Download Dissertation

Abstract


In recent years along with the microorganism drugs manufacture’s development as well as experimental facility’s import to the environment request’s enhancement, the P3 laboratory technical level has been promoted greatly. Specially, the SARS virus’s eruption, the country expands the investment to the microorganism and the viral laboratory. The newly built one batch of high grade P3 level laboratory has realized the experiment environment intellectualized monitoring. How to well control the P3 laboratory’s technical specification is a new task, which we should face. The biological safety protection third-level laboratory is strict to the negative pressure and pressure gradient’s request. The system must act according to air blower’s breakdown situation, personnel’s turnover as well as the security cabinet’s starts and stops, which may cause the perturbation to the indoor negative pressure. The system must also carry on the real-time monitoring to the sensor and actuator’s condition, and send out the acousto-optics alarm when each accused parameter exceeds the allowed figure. This article has discussed the Distributed Control System and the Direct Digital Control system in the P3 laboratory synthesis application, the software system’s constitution as well as the digital PID control technology application. The system has taken the method of air flow rate shifting to deal with pressure gradient sudden change, which is caused by laboratory gate opening. In order to serve this purpose, the automatic control system has carried on multi-spot signal gathering nearby the gate. It causes air flow rate shifting appropriate and reasonable, and it effectively alleviates the pressure gradient sudden change. The P3 laboratory’s automatic control system, after the working and the debugging, has achieved the goal very well and obtained expert’s affirmation.

Related Dissertations

  1. Design and Fault Diagnosis of the Coarse Pointing Control System in Satellite Laser Communication,V443.1
  2. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  3. The Inductive Load Based Vehicle Body Network Control System,U463.6
  4. Infrared Imaging Target Simulation Resistance Array Control System Development,TJ765.4
  5. Research on Attitude Control Law of Endo-Atmospheric Missile,TJ765.23
  6. Research and Design of One Kind of Paper’s QCS That Based on Embedded System,TP368.1
  7. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  8. Internal Control System Construction of University Research,G647
  9. The Kinematics and Dynamics on the Cross-rod Parallel Machine Tools,TH113
  10. Software Approach to Implement Power Optimization in Embedded Handheld Mobile Gis Device,TP311.52
  11. Design and Implementation of AT89S52 temperature measurement and control system,TP273.5
  12. The Design on Kinematic Structure & Control System of the New Plate Bending Machine,TG333.24
  13. Research on Machine Vision High-speed Positioning System Based on Linear Motor,TM33
  14. Design and Implementation of Centralized Controller for Modular Photovoltaic Inverter,TM464
  15. Design and Implementation of Earth Sensor for Micro-satellite,TP212
  16. Research and Practice of a Monitor and Control Software System Suitable for Use in Heterogeneous Computing Enviorment,TP277
  17. Study of metal -organic chemical vapor deposition equipment control system,TN304.055
  18. Virtual domain access control system protection mechanisms,TP309.2
  19. Scrap copper smelting process control system design and implementation,TP273
  20. Research and design of the television remote control system based on brain-computer interface technology,TP872
  21. The Quality and Safety of Agricultural Products and Control of Nanjing,F322

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net  Mobile