Dissertation > Excellent graduate degree dissertation topics show

Effect of Rolling Technology on the Microstructure and Properties Properties of Al-5Fe-Based Alloy

Author: WangShuSheng
Tutor: YuanXiaoGuang
School: Shenyang University of Technology
Course: Materials Processing Engineering
Keywords: Al-Fe based alloy Rolling technology Microstructure Mechanical property
CLC: TG131
Type: Master's thesis
Year: 2009
Downloads: 48
Quote: 0
Read: Download Dissertation

Abstract


Iron-rich phase in Al-Fe alloy has a shape of thick fragility needle-like or needle-plate, which will cause the reduction of the alloy mechanical property. This paper has studied the technique to improve the phase shape for increasing the mechanical property of Al-Fe alloy. The study work has been center on the deformation performance of Al-5Fe alloy billet prepared by electromagnetic stirring and the change rule of the microstructure and property in the deformation process .a kind of deformation Al-Fe based alloy has been designed,the effect of the rolling technology on deformation performance of the electromagnetic stirring and squeezing billets has been studied individually,at the same time ,the microstructure and mechanical property has been also studied.The research result indicates the Al-5Fe alloy has well high temperature deformation property , iron-rich phase in Al-Fe alloy was breaked gradually in the deformation process of Al-Fe alloy,its mechanic property has been increased obviously, the tensile strength and extensibility in the room-temperature are 146.7 MPa and 28.7% which increase 52.5% and 277% than electromagnetic stirring Al-Fe alloy.Against the desighed Al-Fe-based alloy in this paper ,the crack on the brim of the plate from electromagnetic stirring billet is at least ,the refine result of the iron-rich phase is also at the best ,its average dimension is 0.01mm,and has the most homogeneous distribution, the tensile strength and extensibility in the room-temperature are 314.5 MPa and 7.2%.The density of the electromagnetic stirring billet has been increased obviously after solid-squeezing ,its population deformation performance is better than the electromagnetic stirring billet.the brim of the plate from scheme-3 has not crack approximately,but, for the result of the Iron-rich phase has not reach the optimal result, the tensile strength in the room-temperature has been increased not obviously compared to the plate from electromagnetic stirring billet,only 3.1%.on the contrary, the refine result of the Iron-rich phase of the plate from the scheme-5 reach the optimal result, the tensile strength in the room-temperature arrive at 354.6MPa which was increased about 12.5% than the plate from electromagnetic stirring billet.but the brim of the plate from solid-squeezing billet has microcrack.After the electromagnetic stirring and solid-squeezing process , the degree of hardness of the deformation has a big descending tendency between 25℃～200℃, but the descending tendency is gently when the plate from 200℃to 300℃.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Study on the Synthesis and Properties of Copolyimides Derived from ODPA/Isomeric ODA,TQ323.7
  7. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  8. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  9. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  10. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  11. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  12. Studies on the Influence of Rare Earth Ce on Microstructure and Properties of Huge Heat Input SAW Seam Metal,TG445
  13. Dissimilar magnesium alloy AZ31 and NZ30K study of laser welding,TG456.7
  14. Triple-Wire High Speed GMAW Butt Joint Welding Process of Marine E Grade Steel,TG457.11
  15. Heat Treatment of Cast Al-Cu-Ti-(La) alloy microstructure and mechanical properties of,TG166.3
  16. Liquid Forging hypereutectic Al-Si alloy microstructure and properties,TG319
  17. Absorbent sheet synthesis and modification of,TB34
  18. Failure Analysis and Processing Technology Improvement of the Bicycle Flywheel Parts and Its Molding Die,U484
  19. Study on the Preparation and Doping Y2O3 of Low-voltage ZnO Varistor Ceramics,TN304.93
  20. Study on Femto-Second Laser Pulse Propagation in Tapered Holey Fibers,TN253
  21. A Microstructure Analytical Model of 3-D Woven Fabric for Ballistic Penetration Calculation,TS101

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > The alloy learn with a variety of properties of alloys > Alloy theory
© 2012 www.DissertationTopic.Net  Mobile