Dissertation > Excellent graduate degree dissertation topics show

Research on the SVM-DTC Control Theory for Induction Motors

Author: ZhaoGang
Tutor: WangDeMing；LiuXianXing
School: Jiangsu University
Course: Motor and electrical
Keywords: asynchronous motor Direct Torque Control speed sensorless full-order adaptive state observer Space Vector Modulation(SVM) Digital Signal Processor (DSP)
CLC: TM343
Type: Master's thesis
Year: 2009
Downloads: 273
Quote: 2
Read: Download Dissertation

Abstract


Direct torque control(DTC)technique has developed since the 1980, It is a newly high-powered AC drive control technique after the vector control technique.DTC directly calculate and control the torque of AC drive in the stator reference frame.By using stator field-orientation,the optimum switching mode is achieved to control the inverter.DTC suffer the widespread concern and the quick development because of it’s novel control thought,manifest system construction and well stationary and dynamic characters.In this thesis the author made a profound and broad study on the design of speed observer and stator flux observer and the digital realization of system.Speed sensorless asynchronous motor system of direct torque control has been introduced by high performance digital signal processor(DSP) of TMS320F2812.Because of the limitation of the classical observer method of stator flux,the observing precision of the stator flux observer must be high,a new adaptive stator flux observer is proposed.With this observer,the stator flux and the speed can be also observed.The robustness to parameter variations and good performance are fully verified by the simulations.Based on the full order flux observer,according to the Lyapunov’theory,the adaptive schemes of speed observer are designed successfully.At last,the author applied a simple speed estimator combined with the flux observer in the direct torque control system.The defect of the classical DTC is researched,a new tactic of Direct Torque Control based on space vector modulation is proposed. Performance of DTC system is improved.An improvement can be obtained adding a new DTC algorithm based on the application of the space vector modulation(SVM) to DTC.At each sampling period,the voltage vector is synthesized two of voltage space vectors and zero voltage space vectors.By this means,the torque ripple is reduced. Simulation and experiment results show that these methods above-mentioned can hold dynamic performance of the basic DTC, weaken the torque ripple and electromagnetic noise greatly.Furthermore, the methods are very easy to realize and have improved accuracy of the observation.The system is implemented on a Digital Signal Processor (DSPTMS320LF2812).The real-time controller software is written by C language,and the research of digital realization and the software design are carried out.

Related Dissertations

  1. Simulation Research on Compound-Structure Permanent-Magnet Synchronous Machine System Used in Hybrid Electric Vehicles,TM341
  2. A Novel Controller Design for Active Power Filter with Low Switching Loss,TN713.8
  3. Permanent magnet direct drive wind turbine converter control technology research,TM46
  4. Brushless doubly- fed wind generator Direct Torque Control Technology,TM315
  5. VSCF doubly-fed wind turbine maximum power point tracking control,TM614
  6. Appliances phase permanent magnet motor control system,TM341
  7. AC induction motor side inverter wind turbine research,TM464
  8. Electric Vehicle AC Speed ??Control System Design,U463.6
  9. SVPWM Based on DSP and motor speed regulation system design and research,TM921.51
  10. Induction Motor Direct Torque Control System Design and Research,TM343
  11. TBM cutterhead system synchronization driven research,TM921.48
  12. Study of Mine Electric Locomotive Inverter Frequency Control System Based on DSP,TD64
  13. Study of the Speed Sensorless Vector Control System by EKF,TM34
  14. The Special Design and Research Based on FPGA of Frequency Conversion System for Running Machine,TM921.51
  15. Research on the New Type Brushless Wound-Rotor Asynchronous Motor,TM343
  16. Research on Speed-sensorless Vector Control System Based on MRAS for Asynchronous Motor,TM343
  17. Experimental Studies on the Three-winding Single-phase Motor for Agricultural Engineering,TM343
  18. Research of Motor’s Rotor Fault Diagnosis System Based on DSP,TM307
  19. The Drive Control of the Automatic Transmission Test-bed,TM343
  20. Speed Controller and Observer for Induction Motor Servo System,TM346
  21. Research on Dual-PWM Converter and It’s Control Strategy,TM921.51

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Induction motor
© 2012 www.DissertationTopic.Net  Mobile