Dissertation > Excellent graduate degree dissertation topics show

Study of Interfacial Debonding of Reinforced Concrete under Cyclic Loading

Author: FengLeiLei
Tutor: ChenYanHua
School: Hebei University of Technology
Course: Structural Engineering
Keywords: reinforced concrete debonding cyclic load interface ADINA
CLC: TU375
Type: Master's thesis
Year: 2008
Downloads: 73
Quote: 0
Read: Download Dissertation

Abstract


Studies on bonding capability under monotony load has been developed well while under cyclic load is few. The research method and status on bonding capability of reinforced concrete is analyzed from experiment, theory and finite analysis. 3-D modeling method is established, and exploring experiment is made. Numerical model is made for the pulling out pieces under cyclic load, and the interfacial debonding capability and influences of reinforced concrete are studied.3-D finite model is established through body and volume. The dimensions of the steel, anchored depth and thickness of the safeguard are all considered. Cyclic load is chosen according to practicality engineering, the effect of the friction is also discussed. Several conclusions are gained and compared with the theory and experimental result. The smaller the dimension of the steel is, the stronger the bonding is. Increasing the anchor length properly can decrease the debonding velocity. The bonding intensity is in direct ratio to safeguard thickness. The bonding intensity holds the line when the thickness reaches to a certainty. Reasonable values are reached for the diameter of the steel, anchoring length and safeguard depth under different cases. The debonding case of the steel is different under different loading manners. The steel under changing range load debonds first, the steel under two-stage load can carry through the longest time, the time of the steel under same range load is between the steel under changing range load and two-stage load. When design members, the manners of the applying load should be considered, proper measures should be made to strengthen capability as well. The effect of friction was discussed by setting friction or not, the result of numerical result is primary validated through experiment, and consultant advices are supplied for further trial research.

Related Dissertations

  1. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  2. Research on Automatic Detection Algorithm for Substructure Distress of Highway Pavement Based on SVM,U418.6
  3. Design and Implementation of Windows Kernel-mode Cryptographic Service Interface,TP309.7
  4. Development of the Missile Controller in Servo Systems Based on NIOS II,TP273
  5. Development of LXI Instrument Web Interface,TP274
  6. Gui Design and Application Oriented to Embedded Ultrasonic Detecting System,TP274.53
  7. Development of Vxibus Common Interface Module Based on DSP,TP274
  8. Development of LXI Counter,TP274
  9. Research on the Method of Interface Automatic Generation Based on MDA,TP311.5
  10. Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
  11. Preparation, Characterization and Application of Prussian Blue Composite Nanomaterials,TB383.1
  12. Research and Application of Graphic Interface Engine on Digital TV Middleware,TP391.41
  13. Carbon fiber reinforced epoxy resin surface treatment and interfacial properties of composite materials,TB332
  14. Study and Fabrication of High-efficiency Organic Light-emitting Diodes (OLED),TN383.1
  15. A New Experience of Interaction,TP11
  16. The Corporate Affairs Calendar instant management system,TP311.52
  17. The Deep Foundation Pit Engineering Support Numerical Simulation and Field Testing Research,TU473.2
  18. Research and Implementation of the Techniques of Embedded Network Video Applications,TP368.1
  19. The Design and Implementation of a Game Interface Interaction on Mobile Phone,TP311.52
  20. Synthesis of Uniform Magnetite Nanoparticles Via W/O Interface System Applied as Bio-Labels,TB383.1
  21. Study on the Ductility of Reinforced Concrete Special-shaped Columns with Different Design Parameters,TU375.3

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures
© 2012 www.DissertationTopic.Net  Mobile