Dissertation > Excellent graduate degree dissertation topics show

Investigation and Analyses on the Early Forecasting of Concrete Strength

Author: LinYong
Tutor: LiZhiGuo；LiuQuanYi
School: Tianjin University
Course: Architecture and Civil Engineering
Keywords: Ordinary Portland Cement concrete concrete strength early forecasting unary linear regression new maturity
CLC: TU528
Type: Master's thesis
Year: 2008
Downloads: 131
Quote: 1
Read: Download Dissertation

Abstract


Concrete strength, the core technique parameter in concrete quality control, is not only an important basis for structural design and construction but also one of the most important performances. Early determination and prediction about concrete strength receives much attention from each countries engineer and technician, through a lot of system researches, and have achieved considerable results. However, the quality of concrete is influenced by material machinery, methods and environment. Therefore, when forecasting 28d the compressive strength of concrete, prediction formulas will be different according to various factors. For raw materials usually used in specific areas, there should establish the corresponding forecast formula, but many forecasting formulas are established under the experimental conditions, thereby ignoring the impact on the development of concrete strength from temperature difference between the natural conditions and the standard conditions. Taking engineering practice into consideration, this paper makes a study on methods forecasting concrete 28d compressive strength though that of 3d, 7d under the standard curing conditions, and works out the most suitable method for early forecasting about concrete in Lu-Nan area.First of all, with the actual choice of four water-cement ratio of Ordinary Portland Cement we tested concrete strength of 3d, 7d and 28d, established a mathematical prediction model according a unary regression analysis on results, and made a theoretical analysis, which provides a theoretical basis for the early forecast for China’s Lu-Nan area in the Ordinary Portland Cement concrete strength.Secondly, the discussion was made here on the main principles and the development process of the maturity as well as the establishing process of the formula for calculating the new maturity. Maturity is important in practice. It is a convenient and effective way to use the maturity rules to estimate the strength of concrete, especially giving a good guidance on forecasting the actual concrete strength onsite under the non-standard curing condition. Using test data on early forecasting of concrete strength, along with the Ordinary Portland Cement concrete forecasting model under the standard conditions and non-standard curing conditions, which is the application of new maturity, we set up an early forecasting method on the strength of concrete by the integration of single linear of the unary regression model and the maturity model after verifying the accuracy of their presumption through test datum.

Related Dissertations

  1. Static Properties Analysis of the ZW Wall Based on ANSYS,TU398.2
  2. The Feasibility Investigation to the Concrete Made by the Red Mud for Zhongzhou Aluminium Factory,X705
  3. Inpesting Appraising and Reliability Assessment of Existing Concret Simple Supported Beam-Bridge,U445.7
  4. Research on the Performance of Machine-Made Sand Concrete in Parts of Yunnan Province,TU528
  5. Durability Study of the Concrete Components Bonded with Bfrp Composite Sheets under Ultraviolet Light,TU375
  6. The Application of Mesoscopic Degenerate Compressive Strength Formula in Concrete to Vulnerability Index of Frame Structure,TU375
  7. The Research on Shearing Resistance Properties and the Calculation Method of Oblique Section of Composite Beam,TU375.1
  8. Study by Non-destructive Method on Concrete Strength Based on Elastic Wave Theory,TU755.7
  9. Experiment and Rsearch of Ultra-Fine Sand Pumping Concrete Shrinkage Characteristics,TV431.9
  10. The Research about Combined Forecasting Model Applied in House Prices in Chengdu,F293.3
  11. Research on the Concrete Strength of the Construction Initial Setting and Concrete Strength Evaluation Method,TU755.7
  12. Study on Concrete-filled FRP Tube Composite Column,TU398.9
  13. Analysis of Influence Factor on Concrete Strength and Research on Evaluation Method,TU528
  14. Ultra-Fine Sand Study and Application of HPC,TU528.572
  15. The Testing Research and Numerical Simulation on the Existing RC Bridge Structure,TU375.1
  16. Research on the Vertical Joint of PC Concrete Box Girder Bridge,U448.213
  17. Truss steel reinforced concrete special-shaped columns - inequiaxial ultimate capacity of the L-shaped cross-section,TU398.9
  18. Experimental Research and Engineering Application on the Mechanical Properties of HPC,TU528.0
  19. Experimental Research on Concrete of Bi-Block Sleepers in PDL,U214.18
  20. Numerical Analysis Research of Resistance Variation about Damaged Reinforced Concrete Slab,TU375.2

CLC: > Industrial Technology > Building Science > Building Materials > Non-metallic materials > Concrete and concrete products
© 2012 www.DissertationTopic.Net  Mobile