Dissertation > Excellent graduate degree dissertation topics show

Composition Design and Preparation of Heat-Resisting Hyper-Eutectic Al-Si Alloy

Author: YuHongJiang
Tutor: YuanXiaoGuang；LiRunXia
School: Shenyang University of Technology
Course: Materials Processing Engineering
Keywords: Al-Si alloy alloying element heat-treatment microstructure mechanical property
CLC: TG146.21
Type: Master's thesis
Year: 2009
Downloads: 64
Quote: 0
Read: Download Dissertation

Abstract


Hyper-eutectic Al-Si alloys is good at casting and has high strength and other characteristic, so it is extensive used in automotive industy. In this thesis, the effect of addition of chromium and molybdenum has been studied.When 0.6wt. %Cr added in the complex dimensional hyper-eutectic Al-Si alloy, UTS of the alloy enhanced 6%. While after 0.6wt.% chromium and 0.4wt.% molybdenum added in the alloy simultaneously, UTS of the alloy enhanced 44.2%. The extensibility of the alloys fluctuate within a narrow range. SEM analysis showed that chromium and molybdenum can improve microstructure of the alloy and distribution of shapes. Chromium and molybdenum can form some chromium rich phases and some molybdenum rich phases. These changes can improve mechanical properties of the alloys.After T6 heat treated, the morphology of eutectic-Si have significant changes. Through analyzing the SEM photos of microstructure structure ,we find that the eutectic silicon has the remarkable changes at 525℃for 4h and 175℃for 10h.The passivating of silicon phase and the granulation of the second phases improve mechanical properties of the alloy. The T6 heat treatment can improve microstructure. these changes can improve mechanical properties of the alloy. The UTS of the heat treatmeat alloy reach 146.5MPa under high temperature. The plastic of the alloy get large improvement under high temperature.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  6. Study on the Synthesis and Properties of Copolyimides Derived from ODPA/Isomeric ODA,TQ323.7
  7. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  8. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  9. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  10. Study on Key Technology and Its Physiological Basis of Virus Elimination and Rapid Propagation of Phalaenopsis,S682.31
  11. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  12. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  13. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  14. Study on the Subsurface Crack of Supporting Roller Made of Austempered Ductile Iron,TG156.3
  15. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  16. Study on Stock Price Behavior Around Periodical Reports Based on Asymmetric Information,F832.51
  17. Research on Processings and Microstructure and Properties of HRB400MPa,TG335
  18. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  19. The Design and Implementation of Control System for Wire-steel Heat Treatment Direct-fired Furnace,TP273
  20. Study of Performance of Cordierite Combined Mullite Products,TQ175.71
  21. Effect of Adding ZrO 2 Nanopowder on Microstructure and Mechanical Properties of Carbon Steel,TB383.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Non - ferrous metals and their alloys > Light non-ferrous metals and their alloys > Aluminum
© 2012 www.DissertationTopic.Net  Mobile