Dissertation > Excellent graduate degree dissertation topics show

Research on Mechanical Properties and Threshing Damage Mechanism of Grain

Author: ChangGuangBao
Tutor: LiYaoMing
School: Jiangsu University
Course: Mechanical Design and Theory
Keywords: Damage mechanism Impact damage Destructive power Failure energy Finite element analysis
CLC: S511
Type: Master's thesis
Year: 2009
Downloads: 158
Quote: 4
Read: Download Dissertation

Abstract


The injury of grain is linked to internal and external stress,is also concerned with mechanical properties.In this paper,the physical and mechanical properties of grain are researched.The relationship between internal organization and mechanical properties of grain is analyzed.This article introduces different types of gain damage during threshing.And the conceptions of the outer damage index,the inner damage index, the standard damage index etc.are defined in order to make quantitative evaluation.The mechanical properties of grain are analyzed by the software of ANSYS.The location of maximum tensile stress is on the area of farinaceous endosperm and embryo when the top of grain is loaded.And the location of maximum tensile stress is on the area of embryo.It finally shows that the fracture of the seed is resulted by the tensile stress.Utilizing the impact test device of agriculture material invented by ourselves,the grains of different varieties,different moisture content,and different height are researched while the grains are impacted.At last,the failure energies of grains are obtained.Spike-tooth threshing unit is used as an example,the relative velocity between the grain and spike-tooth is calculated during the collision process between the grain and threshing component while the stress crack just occurs in the grain.Finally,it proves that the experimental results are according with the results of theory analysis.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  5. Protein phosphatase 2A Cα subunit knockout cardiac energy metabolism due to remodeling,Q78
  6. Design of Testing Equipment for Electronic Products,TN06
  7. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  8. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  9. Sham hose drum drive means and hydraulic system of the structure,TE973
  10. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  11. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  12. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  13. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  14. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83
  15. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  16. The Design of Telescopic Asphalt Spraying System,U415.524
  17. Development of Post-process System in Sheet Metal Simulation Based on SolidWorks,TP391.72
  18. Failure Analysis and Structural Optimization of the Typical Fine Blanking Punch,TG385.2
  19. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  20. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  21. Simulation Analysis and Experimental Study on Hysteretic Behavior of High-performance Shear Panel Damper,TU352.1

CLC: > Agricultural Sciences > Crop > Cereal crops > Rice
© 2012 www.DissertationTopic.Net  Mobile