Dissertation > Excellent graduate degree dissertation topics show
The System of Ultrasonic Ranging Base on FPGA
Author: WuChao
Tutor: YangHongTing;DaiYaWen
School: Wuhan University of Technology
Course: Condensed Matter Physics
Keywords: The system of ultrasonic ranging FPGA MCU
CLC: TP274.53
Type: Master's thesis
Year: 2009
Downloads: 651
Quote: 1
Read: Download Dissertation
Abstract
|
As an indirect distance measurement,the system of ultrasonic ranging has been widely used in traffic obstacle avoidance,safety early warning,auto-navigation and field robot for its good capability and lower price.But ultrasonic distance measurement also has much limitation in special actual application.The research on improving the measurement accuracy is very important to developing the technology of ultrasonic ranging.In market,most of the systems of ultrasonic ranging use the single chip microcomputer as a main controller to transmit the driving signal.The measurement accuracy cannot win great satisfaction,although it’s cheap.The FPGA(Field Programmable Gate Arrays) is a kind of programmable device.It provides a new plan of design for the system of ultrasonic ranging.As these reasons,this paper introduces a system of ultrasonic ranging base on FPGA.The most important parts of the system are the signal transport and receiver. There is a error of time delay When the program is running.For this reason the MCU can not match the needed of exactitude ranging.This paper introduces the hardware of the system.With a view to the software of the system,the FPGA can easily control the center frequency of ultrasonic detector by dividing the frequency of the main clock.It can get an accuracy time of the measurement through a frequency counter.As a conclusion,the design can improve the accuracy of the system.
|
Related Dissertations
- Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
- Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
- Development of LXI Arbitrary Waveform Generator,TM935
- Design of Digital Predistorter for RF Power Amplifier Based on FPGA,TN722.75
- Synchronization and Channel Estimation Algorithm in Bursted OFDM System and Its Implementation on FPGA,TN919.3
- Performance Analysis of Anti-Multipath Capability in DSSS System and Study on the Compensation Methods,TN914.42
- Optimizing and Realising Research on Vedio Compression in TV Guidance System,TN919.81
- Research and Hardware Simulation of Multiuser Spread Spectrum Code Acquisition Based on FPGA,TN914.42
- Research on Basic Algorithms of Digital Image Processing and Implementation with FPGA,TP391.41
- Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
- Design of High-Speed Digital Image Acquisition and Interface Based on FPGA,TP274.2
- Development of Inductance Sensor Data Acquisition System Based on FPGA,TP274.2
- Development of Serial Bus Analyzer Based on Nios,TP274
- Development of PMC High-speed Data Transmission Board Design Based on FPGA-RocketIO_X,TP274.2
- Development of Pxibus High Performance Digital I/O Module,TP274
- Development of LXI Counter,TP274
- A High-Speed and Real-Time Data Acquisition System Based on FPGA,TP274.2
- Greenhouse air source heat pump heating systems,S625
- The Electrostatic Dust Removal System Based on Microcontroller and LabVIEW,X701.2
- Design of GPS Information Receiving System Based on Nios Ⅱ,TN967.1
- Temperature and pressure explosives temperature field memory test technology,TQ560.7
CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Data processing, data processing system > Automatic detection system using a variety of new technologies > Ultrasonic testing equipment
© 2012 www.DissertationTopic.Net Mobile
|