Dissertation > Excellent graduate degree dissertation topics show

Numerical Simulation about Butt-welding Deformation

Author: YanHongDan
Tutor: LiMengSheng
School: Hefei University of Technology
Course: Materials Processing Engineering
Keywords: Numerical simulation The finite element analysis Welding deformation Bound method The equal load
CLC: TG404
Type: Master's thesis
Year: 2009
Downloads: 404
Quote: 1
Read: Download Dissertation

Abstract


Welding deformation is one of the most common problems in the structural manufacturing process, and has been taken more attention to. ANSYS software is used to simulate the temperature fields, the residual stress fields and the deformation fields about the low-carbon steel.The most content of study in this paper: the double-ellipsoid chosen as heat source models to simulate the temperature fields and the residual stress fields about the low-carbon steel butt-welding of MIG. We have discussed the effects about simulating the welding residual deformations of the post in the different constraint location by comparison with the simulation results and the actual measures of the welding. And we have discussed the effects about the welding deformation in the different welding processes and the thickness by comparison about the size of the macro-deformation and the roughness of deformation in the surface. And they have been verified by welding experiments.Simulation results have indicated: that constraint location infected the simulation a lot, and when applying the gravity constraint at the symmetrical bottom, the results of the simulation are more accurate. The numerical simulation results under adopting the equal load are the nearest actual result. The thickness, the size of the cross-section and the procedure specifications in welding are the main factors about the welding deformation. Multi-channel welds can strengthen the binding effect when increasing the cross-section in welding and improving the stiffness of welding departments, and then the follow-up welding deformation is smaller.Finally, it is validated that the finite element model and the simulation results are exact. The methods applying the constraint at the symmetrical bottom and applying the equal load can be used for the numerical simulation of the butt-welding.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  3. Study on Springback of High-Strength Steel Stamping,TG386
  4. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. EDM Electrode Wear Mechanism and Control Research,TG661
  7. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  8. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  9. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  10. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  11. Study on the Heat Transfer Characteristics of Particle Cluster in Circulating Fluidized Bed,TK124
  12. Numerical Simulation of SNCR Process of a 600MW Utility Boiler,TK222
  13. Numerical Simulation of Biomass Direct Reburning,TK16
  14. Numerical Simulation on Pulverized Coal Combustion Process in a 670T/H Tangential Firing Furnace,TK224.11
  15. Numerical Simulation on the Combustion Process in the Furnace of a 1000MW Lignite-Fired USC Boiler,TK224.11
  16. Study on Gas-Solid Two-Phase Flow in Spouted Beds,TK173
  17. Experimental Study and Numerical Simulation on Aerodynamic Field of Tangential Bias Swirl Burner,TK223.23
  18. Characteristic Study of Combustion in Central Reverse Flame Chamber,TK223.21
  19. Numerical Simulation and Contrastive Analysis of Labyrinth Seals and Leaf Seals,TK263.2
  20. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  21. Numerical Study on Phosphorus Distribution in Water Environment of the Three Gorges Reservoir,X832

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding general issues > Stress and deformation of welded structures
© 2012 www.DissertationTopic.Net  Mobile