Dissertation > Excellent graduate degree dissertation topics show

The Study on the Thermal Properties and Corrosion Resistance of Vacuum Sintering Ni-based Cermet Composite Coating with Rare Earth Joined

Author: MeiKun
Tutor: XuanTianPeng
School: Hefei University of Technology
Course: Materials Science
Keywords: Vacuum fusion sintering Rare Earth element Ni-based alloy thermal fatigue resistance corrosion resistance
CLC: TG174.4
Type: Master's thesis
Year: 2009
Downloads: 97
Quote: 0
Read: Download Dissertation

Abstract


Vacuum fusion sinter technique was used to form Ni-based cermet composite coatings with rare eatth joined on 45 steel substrate. The microstrucure, morpholo- gy and micro-hardness was observed and analyzed by scanning electron microscopy (SEM),optical microscope, X-ray diffractemeter and microhardness instrument. The thermal properties and corrosion resistance were especially investigated. The coati- ng is composed of Ni-based solidlution and dispersion hard phase such as carbides and borides. The elements of both the coating and the substrate diffuse to each oth- er.The excellent metallurgy bonding was formed between the coating and the subsr- ate.At high tempretute, WC transformation occurs. The dominant characteristics are that it transforms into lots of needle phase and particle phase.on the verge of hard phase.The uniformity of the microstructure can be improved by adding arth element LaLa, and the fusion between coating and substrate is formed easily ,which incress their bonding. The rare earth elements also hinder the diffusion of Fe atom from matrix to coating and hold back the dilution of Fe, ensuring the chemical composition of the coating. Meanwhile the composite coating adding rare earth element La makes needle phases reduced or vanished, microstructure changes to be smaller and uniform, and precipitate new phase. The hardness of coating surface and the micro-hardness of Ni-base solid solution and some phases have been largely increased.The micro-hardness of transition area between the matrix and coating changes more mildly and the peak value of hardness appears in the coating from 0.2mm to 0.4mm beyond interface. The corrosion resistance of coating is better in NaCl and NaOH solution but bad in acid. Influence of WC on corrosion resistance is very complex and need to be analyzed according to definite corrosion solution.

Related Dissertations

  1. Biological Effect of Rare Earth Element and Genetic Transformation on Arnebia Euchroma(Royle) Johnst.Cell,S567.239
  2. Research on Electrochemical Synthesis and Application of Conductive Polyaniline,O633.21
  3. Electroless Ni-Pon the Bulk Nanocrystalline Ingot Iron,TQ153.1
  4. Study on Corrosion Resistance and Condensation Property of Ni-P/Nano SiO2 Composite Coatings,TG174.4
  5. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  6. Preparation, Characterization and Performance of the Bio-coatings on the Surface of Pure Titanium Based on Micro Arc Oxidation,R318.08
  7. Pulse Nanocomposite Coatings Preparation and Properties,TQ153
  8. Magnesium alloys and corrosion resistance of phosphating process,TG174.4
  9. Vacuum casting AZ91 Magnesium Alloy Corrosion Resistance,TG146.22
  10. Carbon steel liquid plasma electrolytic carbonitriding research,TG156.8
  11. ZA35 alloy elements Zr on Microstructure and Properties,TG131
  12. The Study on Red Soil Corrosion by the Technological Direct, Continuous Monitoring,X53
  13. Preparation and Microstructure of Nano-crystalline Zn-Ni Alloy by Jet Electrodeposition,TG174.4
  14. Study on Mechanical and Corrosion Properties of Megnesium-Zinc Based Alloys for Biomaterial,TG146.22
  15. Hydroxyapatite Coating Prepared on Porous Titanium Substrate by Sol-gel,R318.08
  16. Study on the Ceramic-metal Composite Coatings on the Surface of Carbon Steel by Laser Cladding,TG174.44
  17. Research on the Displacement Film Located on the Magnesium Alloy AZ31 for Plating,TQ153.12
  18. Study on and the Process and Anticorrosion Mechanism of Hot Dipping Zinc and Zinc Radicle Metal Alloy Coatin,TQ153.1
  19. Hot-dip galvanized base alloy ammonium fluxing agent process and principle,TQ153.15
  20. Study of Corrosion Resistant Coating on 45# Steel Fabricated by Laser Surface Cladding,TG174.44
  21. Preparation and Properties of Organic-Inorganic Hybrid Anticorrosion Coatings on Metal Surface,TG174.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection > Metal surface protection technology
© 2012 www.DissertationTopic.Net  Mobile