Dissertation > Excellent graduate degree dissertation topics show

Simulation of Two Non-normal Operations and Study on Relevant Parameters of Synchronous Generator

Author: WangZhong
Tutor: LuoYingLi
School: North China Electric Power University (Beijing)
Course: Motor and electrical
Keywords: synchronous generator finite element methods least square method
CLC: TM31
Type: Master's thesis
Year: 2009
Downloads: 107
Quote: 1
Read: Download Dissertation

Abstract


This thesis is carried out previous studies about the designing plan about turbo generate which is one million multikilowatt supporting from the country.First of all,it is choosed a turbo generate which is 62.5MW as a researching object to create model through ANSYS finite element analysis software,Meanwhile it calculate no-load,short circuit and kinds of load to compare with experimental comparative with the finite element program and optimizate the model.Second the methods of the identification have also been studied.it is put forward the way about the combination of the finite element and the least square method.It calculates suddenly short-circuit of three-phase on no-loading and the small disturbance of the excitation.It identifies the corresponding curves to obtain the relevant parameters with the least square method and verify parameters.Finally the findings of this thesis help to provide a reference on the designing of the synchronous generators,and the procedure which is one of the achievements is expected to identify the actual research for the next step.

Related Dissertations

  1. The Method for Inertial Platform Testing and Parameter Identification,V249.322
  2. Simulation System of the Vehicle Experiment of the Inertial Platform and Research of Identification Method,TN966
  3. On-line Monitoring of Performance Targets and Optimization of Control Strategy for Limestone Wet Flue Gas Desulphurization,X701.3
  4. Experimental Research on Stress Electrical Spectrum Lines of H Shape Pillar under the Eccentrical Compression,TU392.1
  5. Research on Utilization Technique of Regenerating Braking Energy in Urban Rail Traction System,TM922.3
  6. Reaserch on Corrective Surgery Program of Pectus Excavatum Based on NUSS Procedure,R655
  7. Study of Synchronous Generator Test and Its Transient Parameters Identification,TM31
  8. Design and Analysis of a Novel PM Wind-power Generator with Opposite-rotation Dual-Rotor,TM341
  9. Research on Dynamic Modeling and Hydrodynamic Parameters Identification for AUV,TP242
  10. Based on the Analysis of the Satisfaction of Consumer Behavior IVR System Design and Implementation,TP274
  11. Comprehensive Stability Research and Governance on Coal Gangue Slope,TU43
  12. Element-Free Galerkin Method(EFGM) and Its Application in the Stability of Symmetrically Laminated Composite Plates,O343.1
  13. Statistical analysis of the different data under semi - varying coefficient models,O242.1
  14. Theory and Realization of Partial Position Error Projects’ Visualization,TG83
  15. The Research of Passive Automatic Maximum Wind Energy Tracking Wind Power Generation System,TM315
  16. Research of Automatic Quasi-Synchronization Algorithm and Device of Synchronous Generators,TM31
  17. Research on Hybrid Excitation Outer Rotor Synchronous Wind Generator,TM341
  18. Research on Three-stage Brushless Synchronous Generator Excitation Control,TM31
  19. Study on the Soft Measurement for Moisture Content of Acrylonitrile Polymer,TP273
  20. Research and Application of the Autoregresstive Model-Based Image Interpolation Algorithm,TP391.41
  21. Antenna’s Modeling and Dynamic Property Analysis for a Radar Vehicle,TN957.2

CLC: > Industrial Technology > Electrotechnical > Motor > Generators, large the generator group ( Zonglun,)
© 2012 www.DissertationTopic.Net  Mobile