Dissertation > Excellent graduate degree dissertation topics show

The Analysis of a Floor-steel Silo under Seismic Force

Author: GaoJinSuo
Tutor: GuoChengXi
School: Xi'an University of Architecture and Technology
Course: Structural Engineering
Keywords: silo ANSYS spectrum analysis analysis of the transient
CLC: TU391
Type: Master's thesis
Year: 2009
Downloads: 79
Quote: 0
Read: Download Dissertation

Abstract


Silo structure is widely used in industrial and transportation sectors,particularly in the systems of coal,building materials,metallurgy and so on.It is not perfect in seismic design for the silo structures.In the earthquakes that have occurred in our country, almost all of the silos have been varying degrees of damage.In this article the analysis is based on floor-alumina silo,using ANSYS finite element analysis software,the silo model is established,and the analysis is completed on three models,in the first one materials are full contacted with the wall of warehouse;in the another one the upper 30%is considered coupling and the lower 70%is considered contacting;in the last one coupling is the only factor to consider.A model of the silo is set up using ANSYS software for spectral analysis,and the results of the stress and displacement of the silo of three models are received,and the analysis of three models of grain silo is compared to the result calculated specifications. The normative calculation results are higher obviously than the finite element results.It is shown that the friction between the storage and silo wall and the accumulation stiffness of storage can be very good seismic energy consumptions in the process of an earthquake.Because spectral analysis does not reflect the true results of the earthquake,the transient analysis is also carded out in the paper,the time-history analysis of EL-Centro earthquake wave patterns for three models is completed,and the results are compared with the ones which are according to the norms.Time-history analysis can excellently reflect the stress and deformation of the silo structure in the process of earthquake,the time-history analysis results furtherly prove that the friction between the storage and silo wall is the factor that can not be ignored in the process of earthquake. Finally,the analysis of three kinds of load cases is completed,at the same time compared with the ones which are according to the norms,The results show that for the floor-standing steel silo under the effect of the earthquake,the earthquake played a control role in the design of the silo.The calculations show that the phenomenon of "Elephant-foot" is obvious and some stress concentrations are existing in the finite element calculation results.

Related Dissertations

  1. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  4. Research on a Fire-fighting Shell for Towers,TU892
  5. Bearing Capacity of Cast-in-place Piles in the Karst Region of Yichun, Jiangxi,U213.1
  6. The Research on the Experimental Technique of the Testing of the Large Scale Model in Real Waves,U661.7
  7. Structure Analysis and Optimization Design for 150 Tons Flat-Top Crane,TH213.3
  8. Numerical Simulation Research on Optimal Milli-second Delay Time with Many Free Surfaces Hole by Hole Blast,TD235
  9. Research of FBAR Temperature Sensor,TP212.11
  10. Safety Analysis for the Large-scale Silo,TU375
  11. The Study on the Influnce of Sub-splits Wire’s AC Corona Characristics under Different Climatic and Environmental Conditions,TM851
  12. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8
  13. Welding Research and Application of sump pumps based on the finite element analysis software,TG457.2
  14. Simulation of infrared multispectral images,TP391.9
  15. Research and Experiment of Partial Mould Thermal Field Analysis Based on Induction Heating,TQ320.66
  16. Pipeline circumferential excitation calculation method of magnetic flux leakage,TG115.284
  17. Pipeline Leakage Detection Technology within the magnetic axis,TH878.3
  18. Real-time medical ultrasound puncture navigation positioning and soft tissue modeling,R318.6
  19. Three parameters of human stress detection system,R318.0
  20. Solar Underwater Robot vector design and analysis,TP242.3
  21. Dynamic damage analysis of concrete gravity dam,TV642.3

CLC: > Industrial Technology > Building Science > Building structure > Metal structures > Steel
© 2012 www.DissertationTopic.Net  Mobile