Dissertation > Excellent graduate degree dissertation topics show

Cutting Tool Wear Real-Time Monitoring Technology Research in Aeronautical Parts Machining

Author: WangDongLei
Tutor: WangZheFeng；NiePeng
School: Shenyang Institute of Aeronautical College
Course: Aviation Aerospace Manufacturing Engineering
Keywords: aeronautical parts tool wear acoustic emission wavelet analysis
CLC: V261
Type: Master's thesis
Year: 2009
Downloads: 183
Quote: 1
Read: Download Dissertation

Abstract


In manufacturing, tool is one of the most basic important factors,which directly impacts the quality of workpiece, efficiency of production and the cost of manufacture etc. Aeronautical parts, especially the vast majority parts in aeroengine are difficult to cut materials such as superalloy. These materials need strict requirements for tool, and the prices of tool is high. However, in order to ensure the machining accuracy, have to replace the tool frequently. This will bring about waste and increase manufacturing costs for it doesn’t make full use of the actual life of tool. Therefore, tool condition monitoring has become one of the most significant parts in the whole aeronautical parts manufacturing process.In this paper, acoustic emission (AE) signal was used as access to study tool wear monitoring. This paper main include the following aspects:1.Through researching the knowledge about the tool wear and acoustic emission monitoring Principle, studying the acoustic emission signals mechanism in Cutting tool, according to the theory of elastic-plastic . In addition, using the experimental verify the correctness of the theory analysis;2.According to the characteristics of acoustic emission signal , design a set of On-line tool wear monitoring system based on acoustic emission.3.Study of theoretical basis of parameter analysis, spectrum analysis and wavelet analysis, and using these methods to analysis the experimental signal. Finding the wavelet analysis is a more effective way for acoustic emission signal. Study on the methods in acoustic emission signal de-noising and analysis the cutting tool acoustic emission signals using the method of wavelet de-noising4.Analysis on the methods of how to select the suitable wavelet basis for cutting tool wear acoustic emission signal through further study of the knowledge relate to wavelet decomposition and wavelet packet decomposition. Come to a difference between new tool and tool Wear Condition through using wavelet to decompose cutting tool wear AE signal. Using db8 wavelet packets basis to decompose cutting tool wear AE signal into 5 level and calculating the signal band energy. Select the characteristics of the band as a criterion of tool wear and set the standard tool wear threshold through the experiment many times. In the end, the state of tool wear monitoring was finished successfully.

Related Dissertations

  1. Research on Testing and Analyzing Technology for Time Parameter of Aerospace Relay,TM58
  2. Study of Event Related Potentials Based on Chinese Auditory Cognition,R318.0
  3. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  4. The Study of Palmprint Image Identification Based on Wavelet Analysis,TP391.41
  5. Study of GPS Data De-noising Method Based on Wavelet and Kalman Filtering,P228.4
  6. On-line Monitoring of Tool Wear for Mass Production,TG71
  7. Development of high-resolution gamma-ray logging tool,TE927
  8. Acoustic emission signals laser detection and analysis,TB52
  9. Corrosion of the tank bottom Noise in AE Research,TH878
  10. Leakage and arc fault protection circuit breaker research,TM561
  11. PVA fiber concrete damage evolution acoustic emission monitoring and destructive mechanism,TU528.572
  12. Based on Acoustic Emission Technique Aramid 1414 / tensile damage behavior of polypropylene,TQ325.14
  13. Tank Bottom Corrosion acoustic emission signal propagation simulation,TE988
  14. Based on morphological analysis of small current grounding fault identification technology and engineering,TM862
  15. Based on wavelet analysis method for fast simulation of fluid,TP391.41
  16. FPGA-based power system harmonic detection system research and design,TM935
  17. Based on wavelet and neural network theory of power system load forecasting,TM715
  18. Analog Circuit Fault Diagnosis Method and Its Application,TN710
  19. DSP FPGA -based near-infrared detector key technology research,TN791
  20. Wavelet Analysis Based Signal Denoising Research in MEMS Gyroscope,TN911.4
  21. Application of Wavelet Analysis in Abnormal Sound Diagnosis of Motorcycle Engines,U483

CLC: > Aviation, aerospace > Aviation > Aeronautical Manufacturing Technology > Manufacturing process and equipment
© 2012 www.DissertationTopic.Net  Mobile