Dissertation > Excellent graduate degree dissertation topics show

Research on Optical Surface Testing with Interferometers

Author: CuiJiFeng
Tutor: SunTao
School: Harbin Institute of Technology
Course: Mechanical Manufacturing and Automation
Keywords: Optical Surface Optical Measurement Shearing Interference Wavefront Reconstruction
Type: Master's thesis
Year: 2008
Downloads: 217
Quote: 0
Read: Download Dissertation


Testing technique used interferometer is based on light interference principle. Compared to the general optical testing technology, measurement with interferometer has a higher sensitivity and accuracy, and it will not produce additional damage and error to the measured surface. In the shearing interference method the measured wavefront will be interfered with another wavefront which is a small translation of the measured wavefront itself. This method does not need standard reference wavefront, and the sensitivity is adjustable. So it is particularly propitious to measure aspherics with large asphericity, and this method has a very good application prospect. Many shear interferometers are used common optical path system that can resist the impact of external disturbances, and this system has a low demand to the coherence of light source and the stability of interferometry devices platform.This paper summarized the testing technique of domestic and overseasfor to optical surface with interferometer. Based on the extensive research of the measurement method to large optical component of domestic and foreign, the research status of the large optical component testing method was reviewed, and common tesing method of aspheric was emphatically analyzed and studied. The important significance of test to large optical component was expounded To the existed problem, the major research contents of this paper was put forward.Theory and principle of optical surface testing technique with shearing interferometer system were studied. Measurement principle, characteristics and system structure of the traditional shearing interferometry, Zygo interferometer and EFL M50 shear interferometer were analyzed and studied detailedly. Interferogram processing and phase analysis of the measurement with shearing interferometer were studied.Measurement experiment and method to optical surface were studied. The measurements to a aluminum planar turned by diamond with PGI and EFL M50 interferometer were conducted respectively. By contrast and analysis with the measuring results. The detection used EFL M50 shear interferometer showed good effects Finally, the error of measurement to optical surface profile was analyzed. The advantages and disadvantages of testing to large optical surface with PGI and EFL M50 shearing interferometer were evaluated.

Related Dissertations

  1. One -dimensional photonic crystal tunable optical and magneto-optical properties of,O734
  2. Large caliber long focal length , image quality detection system research,TH744
  3. On the Generation, Diffractive Properties, and Mearsurement of Optical Vortices,O436.1
  4. Research on Digital Knife-edge Technique to Measure the Large Aperture Aspheric Optical Element,O439
  5. DSP-based adaptive optics system signal processing system,TN911.74
  6. The relative measurement based on optical navigation technology,V249.3
  7. Small -scale laser wavefront aberration detection and control of,TN247
  8. Study on the Method and Experimental Verification of Aircraft Landing Aid System Based on Optical Measurement,TP391.41
  9. Study of Coaxiality Measurement Based on Laser,TP391.41
  10. Square area on the front of the wave pattern description in the ICF system,TN24
  11. Study on Printability of Paper and Its Test Method,TS801
  12. The Research on Optimization for Line-Structured Light Sensor and Camera Calibration,TN948.41
  13. Study of Photoelectric Measurement Technology of Car-body Shape Dimension,TP274
  14. Research on Photoelectric On-line Inspecting Technology in Thickness of Quartz Tube,TP274.4
  15. Atmospheric turbulence optical active tracking stability study of the visual axis,P427.1
  16. The theory and application of digital image correlation method,TP391.41
  17. Optical Measurement System of Gas-liquid Two-phase Flow in Small Channels,O359.1
  18. Space motion target attitude optical measurement method,TP391.41
  19. Research of Adaptive Wave Front Reconstruction Based on Improved Neural Network Algorithm,TP183
  20. Orbit-Determination and Precision Analysis of Space Objects Based on Space-based Optical Surveillance,V556

CLC: > Industrial Technology > Metallurgy and Metal Craft > Tolerance techniques to measure and mechanical measuring instruments > The measurement of surface finish ( surface roughness ) and its meter
© 2012 www.DissertationTopic.Net  Mobile