Dissertation > Excellent graduate degree dissertation topics show

The Study on the Cutter’s Abrasion Rule of PDC Coring Bit

Author: XieXiaoHong
Tutor: ZhangShaoHe
School: Central South University
Course: Geological Engineering
Keywords: PDC coring bit height of protrusion cutting angle average linear velocity indentation hardness
CLC: P634.41
Type: Master's thesis
Year: 2011
Downloads: 177
Quote: 1
Read: Download Dissertation

Abstract


In order to decrease cutter’s abrasion of PDC coring bit, PDC (Polycrystalline diamond compact) was used to abrade rock in the lathe as PDC coring bit cutting rock on the academic analysis. By the experiment, the effect on PDC cutter’s abrasion rule where the cutting angle, the height of protrusion, the linear velocity and rock’s indentation hardness were made was researched. Under the same stress, same rub distance, five different groups of cutting angle, six different groups of height of protrusion, five different groups of linear velocity and five different kinds of rock, PDC cutter’s abrasion volumes were measured respectively. The Finite Element Method software ANSYS was used to analyze stress distribution in rock. And the results were all verified by the field experiment.The main conclusion is that:(1) In order to decrease the PDC cutter’s abrasion volume as far as possible, when the cutting angle of PDC coring bit is 10°or 15°, 2.00mm is the optimal height of protrusion. When the cutting angle is 20°,25°or 30°,3.00mm is the optimal height of protrusion. And 5°is not recommended to be the cutting angle.(2) In order to decrease the PDC cutter’s abrasion volume as far as possible, the cutting angle should be designed to be 10°, when the height protrusion is 1.50mm; the cutting angle should be designed to be between 10°～15°, when the height protrusion is 2.00mm; the cutting angle should be designed to be 20°, when the height protrusion is 2.50mm;and the cutting angle should be designed to be 30°, when the height protrusion is 3.00mm or 3.50mm.(3) The PDC cutter’s abrasion volume and the linear velocity are in direct proportion during drilling.(4) The PDC cutter’s abrasion volume is in inverse proportion to indentation hardness.(5) When the indentation hardness of rocks is larger, bigger cutting angle of PDC coring bit should be designed.(6) When the cutting angle is enlarged, the effective-stress of cutter will be decreased.

Related Dissertations

  1. Study on Electromigration Properties of Low-Ag Lead-free Solder Bump,TG454
  2. Research on Equal Life of the Longitudinal Roadheader Conicial Bits,TD421.5
  3. Research of Space Rotative Camber Machining and the Key Equipment,TG659
  4. Study on Test Chipper of Sandy-shrub,TS64
  5. Finite element analysis of metal cutting process,TG501
  6. Preliminary Study on Tension Properties of Multi-layer Flexible Packaging Material,TB484
  7. Dependence of Forces on Segment Working State in Deep Sawing of Granites,TU564
  8. Study on the Methods of Nanoindentation Testing,TB302
  9. Surface Modification of H13 Steel by CeLa+N and AlCeLa+N Ions Implantation,TG174.4
  10. Study of Papaya Bisecting Theory and Design of the Papaya Bisecting Machine,S226
  11. Study on Matrix PDC Coring Bit Based on Hard Rock Drilling,TE921.1
  12. The Progress and Applications of Conventional Theory of Mechanism-based Strain Gradient Plasticity (CMSG),O344.1
  13. Effects of Deposition Parameters on Microstructure, Interface and Hardness of Ti/TiN and CrN/Si3N4 Nanolayered Coatings and Their Thermal Stability,TB383.1
  14. The Study on Impregnated Diamond Bits for Deep Hole Drilling,P634.41
  15. Study on DTH with Self-propelled Round Bit and Its Simulation Analysis,P634.41
  16. Research on Functionally Graded Polycrystalline Diamond-Cemented Tungsten Carbide Composite Button Insert,P634.41
  17. Research on Reverse Circulation Mechanism of Hollow-through DTH Hammer and Bit Dtructure Optimization,P634.41
  18. The shaped cone single cone bit sports and flow field analysis,P634.41
  19. Analysis on the Typical Geological PDC Bits’ Stress Based on PRO/E Software,P634.41
  20. Study on the Fracture Mechanism and Optimal Design for the Large Diameter Step Impact Drill,P634.41
  21. Research on Diamond Enhanced Tungsten Carbide Composite Button and Its Bits,P634.41
  22. Research on Impregnatation Diamond Boinics Bit,P634.41

CLC: > Astronomy,Earth Sciences > Geology > Geology, mineral prospecting and exploration > Drilling Project > Drill bits,drilling tools > Drill
© 2012 www.DissertationTopic.Net  Mobile