Dissertation > Excellent graduate degree dissertation topics show

Research and Preparation of Phenolic Resin-based Aluminum-glass Fiber Electromagnetic Shielding Materials

Author: XuMing
Tutor: MaJuanRong；BaoHongQuan
School: China Building Materials Academy
Course: Materials Science
Keywords: composite material Al-glass fiber electromagnetic shielding layer structure shielding model
CLC: TB332
Type: Master's thesis
Year: 2009
Downloads: 143
Quote: 0
Read: Download Dissertation

Abstract


As society into the 21st century, the development of science as well as the extensive use of electrical equipment causes a series of social and security issues such as the rise of electromagnetic radiation, electromagnetic leaks and electromagnetic pollution, this has seriously affected people’s life and work. The traditional shielding paint and metal plates can no longer meet the requirements of shielding, especially the frequency and intensity of electromagnetic wave are growing, so study and prepare such EMS material which can shield electromagnetic wave that have a high and wide frequency is a hot spot in nowadays.In this paper, we have prepared a composite material which has been heated and pressurized, and four-point probe, electromagnetic shielding effectiveness instrument and FESEM were employed to characterize the structure and properties of the material, respectively. We discussed the relationship between the filled volume, the structure of the material and the shielding effectiveness, and the difference between classic model curve and measured curve is also clarified. The material which we prepare has a high shielding effectiveness and can be used in a wide range of frequency.The research result show us that: the percolation threshold is lower than 0.15, and the shielding effectiveness(SE) will maintain a constant when filled volume rise to 40%～60%, but drops when keeping rising. Besides, carbon blacks can upgrade the conductivity but SE, and adding common glass fiber will decrease the SE. The research of fiber length show us the SE will not increase with the extending fiber length, the highest SE only can be acquired in a appropriate fiber length.Different SE curves between the prepared material and the single layer structure material tell us, the SE is higher when the material has a multilayer structure, and this gap will expand while frequency is higher. Besides, the classic model can not precisely express the conductive network model, this is because inductive reactance loss, at last the paper has estimated inductive reactance loss is about 7dB when the frequency is 1200MHz.

Related Dissertations

  1. Context of Globalization of Contemporary China’s Development Road,D616
  2. Flexible PVC insulation composites based methods and properties of,TQ325.3
  3. The high fill SSP material PVC - based flexible sound insulation composite materials,TB34
  4. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  5. Research on the Solid Solution and Composite of Double Ionic Substitute Negative Thermal Expansion Compound Zr1-xAlxMoW1-y VyO8,TB34
  6. Mechanical Properties Analysis and Optimum Design of the Super-span Suspension Bridge with CFRP Cables,U448.25
  7. Antarctic Ozone and Vertical Structure of Atmosphere,P421.33
  8. The Study on the Shielding Effectiveness and Structural Designing of Anti-electromagnetic Radiation Maternity Dress,TS941.2
  9. The Research on Preparation and Electromagnetic Shielding Properties of Cenosphere/2024Al Composite,TB333
  10. Research of Electromagnetic Compatibility in Aperture Cavity Based on Improved FDTD,TN03
  11. Electromagnetic Shielding Properties of the Waste Tire Steel Wire Cement-based Materials,TB332
  12. Study on Cement Based Electromagnetic Shielding Composite Materials of Carbon Series,TB332
  13. Analysis of Mobile Phone Radiation in the Electromagnetic Field and Improvement of the Antenna,O441.4;TN828.6
  14. Micro-wave Absorbing and Electromagnetic Shielding Properties of Ferromagnetic Glass-covered Amorphous Micro-wires,TB34
  15. Study of the La-Cu System Electromagnetic Shielding Effectiveness,O441.6
  16. 3D Finite Element Modeling and Characteristic Analysis of Electromagnetic Testing and Tomography Technology,O441.3
  17. Study on the Filled Composite Electromagnetic Shielding Materials,TB34
  18. The Development and Manufacture of the Electromagnetic Shielding Coated Paper,TS761
  19. Study on Properties, Dyeing and Finishing Technology of Electromagnetic Shielding Fabric,TS190.6
  20. Gap conductive rubber impact on the chassis panel efficiency and the development of software platforms,TN03
  21. Research on the Shielding Property of the Leaking Factors on Electromagnetic Shielding Shelter,TN03

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile