Dissertation > Excellent graduate degree dissertation topics show

The Research of Chemical Co-precipitation Synthesis NiCuZn Ferrite and Low Temperature Sintering Process

Author: DaiDingHan
Tutor: HouHua
School: University of North
Course: Materials Processing Engineering
Keywords: NiCuZn ferrite additive microstructure sintering process magnetic properties
CLC: TM277
Type: Master's thesis
Year: 2009
Downloads: 210
Quote: 2
Read: Download Dissertation

Abstract


Soft magnetic NiCuZn ferrite materials is a wide used functional materials.It is wider and wider used in many fields,for example broadcast,television,electronic meter and computer etc,what more the apparatus will be come less and more diminutive.So the study of NiCuZn ferrite materials is an important way.In this paper,nano-particles of NiCuZn ferrites powders were prepared with nickel nitrate,zinc sulfate,copper sulfate and ferrous sulfate as starting materials and ammonium oxalate as the precipitator by employing co-precipitation technique using oxalate precursors.Excellent composition uniformity NiCuZn ferrite powder can be obtained after drying and calcination.Toroidal samples were obtained after being formed and sintered.The impact of the factors discussed above on the magnetic properties of NiCuZn ferrites was assessed by using DSC,TEM, EDS,XRD,VSM,SEM and optical microscopy to investigate the microstructure of the ferrites.Test conditions detailed studies to determine the precursor powder in the process of reaction temperature,reaction time,stirring speed and reaction ratio control factors such as the optimum reaction conditions:reaction temperature 50℃,stirring speed 300 r/min, reaction time 2 h,reactant ratio（COO）2-:Me2+=1.2.Under the best conditions in the above, the precursor powder products which have a good dispersion,particle size of 20～30 nm and yield 97.1%can be obtained.The prepared precursor powder take calcining experiments to determine the course of precursor powder calcined time.The best calcination temperature of calcination conditions: calcination temperature 800℃,calcination time 2 h.The saturation magnetization of NiCuZn ferrite can be available for 52emu/g and the particle size of 50 nm products is around the ferrite conditions.NiCuZn ferrite sintering experiment has been taken.Add trace additives on the H3BO3,forming process and sintering conditions were studied,to draw the best sintering conditions.The results showed that:the best pressure-type pressure is 300 MPa and pressure time is 4 min;the samples should be heat treated at 350～400℃for 2 hours in order to completely eliminate the PVA and take warming rate of 100℃/h;the sintering temperature and the sintering time have been taken that is 900℃and 4 h,cooling with the furnace;additives H3BO3 of its adding is 1%.Under the conditions of this process the density of sintered bodies is 4.52g/cm3 and the Saturation magnetization can be for 65.55emu/g.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of （ZrB2-ZrO2）/BN Composites,TB332
  2. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  3. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  4. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  5. The Effect of Composite Additive on the SNCR,X701
  6. Study on the Combustion Character of Black Liquor from NSSC in Fluidized Bed,TK16
  7. The Research on Action Mechanism of Additive Used in Through-Hole Copper Plating and Its Selection,TQ153.14
  8. Study on Application of Non-phosphate Additive in Frozen Penaeus Vannamei and Mechanism of Water-holding,TS254.4
  9. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  10. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  11. Study on the Fine Structure of Intestine and Intestinal Mucosal Barrier in Zebrfish (Brachydanio Rerio),Q95-33
  12. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  13. Study on the Mechanism of Heat-Induced Gelation of Myofibrillar Proteins,TS251.1
  14. Studies on the Aggregation and Microstructure of Imidazolium Ionic Liquids in Solutions,O645.1
  15. Study on the Migration of Esters Additives in Food Plastic Packaging Materials,TS206.4
  16. 1,3 - propanediamine shrink o-vanillin 3d-4f heteronuclear bimetallic complexes synthesis, structure and properties of,O627.3
  17. Studies of Luminescence Characteristics of Eu3+-doped Rare Earth Borates REBaB9O16 （RE=rare Earth Ions and Y）,O627.3
  18. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  19. Syntheses, Structures and Magnetic Properties of New Octacyanometallate-based Coordination Polymers,O641.4
  20. Study on Influence of Preferred Orientation on Mechanical and Recoverable Properties of TN479 Shape Memory Alloy Sheet,TG139.6
  21. Low-Frequency Magnetic Pulsing Effect as Well as EET Study of Amorphous Alloy Fe43Co43Hf7B6Cu1,TG139.8

CLC: > Industrial Technology > Electrotechnical > Electrical materials > Magnetic materials,ferrite > Ferrite,oxide magnetic materials
© 2012 www.DissertationTopic.Net  Mobile