Dissertation > Excellent graduate degree dissertation topics show

The Failure Process and Failure Mode of Short-leg Shear Wall under Cyclic Loading

Author: YuJun
Tutor: LiQingNing
School: Xi'an University of Architecture and Technology
Course: Structural Engineering
Keywords: short-leg shear wall aseimic behavior ductility low-repeated tests structural member damage
CLC: TU375
Type: Master's thesis
Year: 2009
Downloads: 148
Quote: 1
Read: Download Dissertation

Abstract


RC Short-leg shear wall structure system is situated between the shearing force wall and the speical-shaped columns ’s which one kind of structural style, by heteromorphous section components and so on L-shape and T-shape primarily. It has been widely used in the residential building because its rigidity is moderate, saves the material as well as indoor does not reveal merits and so on beams, columns. In this paper, According to the 15 test samples analyzed under cyclic loading the structure of the failure mode of short-leg shear wall , thus provides some reference for the short-leg shear wall structure’s earthquake resistance performance study.This article prime task is as follows:1. Present short-leg shear wall structure system’s theory and experimental study still mainly by structure overall performance analysis primarily, does the research work in the component level to be few. Therefore this article uses the static test to conduct the analytical study to the short-leg shear wall. The experiment can observe on comprehensively the model all spot stress situation, can the correct measurement test sample distortion and the stress. The T-shape, the L-shape short-leg shear wall test sample has carried under cyclic loading experiment in this article. According to short-leg shear wall in actual structure system operating feature, the stress distributions, final failure model of the specimens and paths of the load transfer are studied in detail, the ductility and energy dissipation of the specimens are also specially studied.2. In this paper, based on a sample of 15 low-cycle loading test, detail all the whole process from the cracking of the specimen to completely undermine, find out the characteristics loads and analyze including and external factors changes, the specimen cracking load, yield load and yield displacement and ultimate load, and limit displacement; analyze the different failure modes of the T-shaped, L-shaped sample; analyze the influence of aspect ratio on baroclinic shear damage、Shear-bending-type damage、Bending failure and torsion failure. Show that the axial compression ratio the greater the cross-section of asymmetric hysteresis loop is also more obvious, which is also detrimental to anti-seismic; In the structure, elastic-plastic displacement angle between layers with high thickness ratio of cross-section decreased, therefore the greater high-thick test piece, the more unfavorable in the earthquake. As the shear span ratio of the smaller, short-leg shear wall shear capacity increases, and the degree of increase as the shear span ratio decrease with increasing. With the limb increased, the failure mode of structural changes, and the corresponding calculation model should be different.

Related Dissertations

  1. Mechanical Property Analysis on Concrete Short Columns with Strengthened Style Hoop,TU375.1
  2. Study on the Ductility of Reinforced Concrete Special-shaped Columns with Different Design Parameters,TU375.3
  3. Experimental Study on Basic Mechanical Properties Short of Columns with Strengthened Style Hoop,TU375.1
  4. Performance Analysis of ZW Shear Wall Under Low Cyclic Loading Based on ANSYS,TU398.2
  5. Experimental Study on Dynamic Performance of Eroded Layered Steel Fibre Reinforced Concrete Beams,TU375.1
  6. Experimental Study on the Seismic Resistance Performance of Steel Fiber Reinforced High-Strength Concrete Frame Exterior Joints,TU377
  7. Reinforced Masonry Shear Wall High-Stength Performance Analysi,TU352.11
  8. Composition and Performances Research on the Asphalt of the Stress Absorbing Layer of Modified Asphalt Mix,U414
  9. Research on the Skeleton Curve and Ductility Coefficient of Hollow Concrete Filled Steel Tubular Members Subjected to Compression and Bending,TU398.9
  10. Research on the Hysteretic Behavior of Cold-Formed Thin-Wall Rectangular-Section Steel Members,TU392.1
  11. Analysis of the Earthquake-resistant Behavior of Tall Building of Short Leg Wall with High Transfer Floor,TU352.11
  12. The Allowed Plasticity Ratio in Ductility Design,U441
  13. Experiment Study and the Influence of the Stress Triaxiality to Structure Steel Fracture,TG115.57
  14. PVA fiber reinforced cement matrix composites mechanical properties of,TU528.572
  15. Static Elastic-plastic Pushover Analysis about Steel Reinforced Concrete Composite Affected by Earthquake,TU398.9
  16. Explore the scalability of contemporary book design,J524
  17. Experimental and Theoretical Analysis of Normal Section Strength of T-Short-Leg Shear Wall,TU398.2
  18. Experiments Study on Stiffness and Ductility of Short-leg Shear Wall,TU375
  19. Experimental Study on Seismic Behaviors of Inclined Column-shaped Transfer Floor of Frame Short-leg Shearwall Structures in Varied Angle of Inclined Column,TU398.2
  20. The study and assessment of the damage to reinforced concrete structural seismic performance,TU375

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures
© 2012 www.DissertationTopic.Net  Mobile