Dissertation > Excellent graduate degree dissertation topics show

The Preparation and Processing of a New Magnesium Alloy

Author: ZhuLiJie
Tutor: LiXiKun
School: Shenyang University of Technology
Course: Materials Science
Keywords: medical materials of magnesium Alloys Ingots Microstructure rolling heat treatment mechanical propertie
CLC: TG146.22
Type: Master's thesis
Year: 2011
Downloads: 121
Quote: 2
Read: Download Dissertation

Abstract


Biomedical materials and products industry are developing very quickly this century , the research and development of new bio-implant materials with independent intellectual property rights, has a wide application prospect and great economic benefits. In this article,through the biocompatibility, the mechanical compatibility, the biodegradability and the non-toxic of magnesium alloy,other alloy elements were joined into the magnesium alloy.The microstructure of the alloy ingot was analysized and the alloy compositions were optimized, The biological medical materials were prepared through given uniform annealing, rolling processing optimizing; The mechanical properties were improved through the heat treatment; The biological medical material which meets the requirement of the mechanical properties was prepared. Main work and results were as follows:(1) Elements determined in the Zn-Zr-Ca-Sr Medical Materials of Magnesium Alloy were: Mg、Zn、Zr、Ca、Sr. The weight content of elements: Zn 2wt%-4wt%, Zr 0.4wt%-0.8wt%, Sr 4wt%-0.6wt%, Ca 0.8wt%-1.2wt%;(2) The pouring temperature is 680℃-700℃; cooling water flow 5L/min.The ingot homogenization system are: heating temperature 400℃, holding time of 16h.(3) To determine the rolling process: Holding at 350℃-400℃, rollers temperayure at 150℃-200℃, milling speed at 10r/min. In the rolling process, the deformation was controled.(4) The aging system of the Zn-Zr-Ca-Sr Medical Materials of Magnesium Alloy sheet: holding the Zn-Zr-Ca-Sr Medical Materials of Magnesium Alloy sheet at 180℃for 12h. Finally the hardness reached 60.5HV, the tensile strength reached 289Mpa and the extension rate reached 11.8 % .

Related Dissertations

  1. Study on Contact Fatigue Life Based on Grease Variation with Temperature,TH117.22
  2. Study on Key Technology and Its Physiological Basis of Virus Elimination and Rapid Propagation of Phalaenopsis,S682.31
  3. Research on Caster Oil-based Cold Rolling Oil,TE666
  4. Study on the Subsurface Crack of Supporting Roller Made of Austempered Ductile Iron,TG156.3
  5. Thermophysics Research on Postharvest Spherical Fruit during Heat Treatment,S66
  6. Research on the Microstructures and Properties of Semi-solid ZL201 Alloy Die Forging,TG146.21
  7. The Research on Rolling and Heat Treatment Technology of AZ31 Magnesium Alloy Thin Sheet,TG166.4
  8. Development of Film Thickness and Experiments Study on Lubrication in Cold Rolling,TG335.12
  9. Research on Reversible Single Stand 4-high Cold Rolling Mill Gauge Control System,TG334.9
  10. The Model Research and System Implementation of Plate Mill AGC and Automatic Rolling,TG334.9
  11. The Effect of Rolling and Cooling Ways on the Microstructure and Mechanical Property of Extra-thick Steel Plate Q460,TG335.5
  12. Effect of Heat Treatment and Alloy Composition on Microstructure and Properties of Wear-resistant Casting Steel,TG142.4
  13. Study on Electromagnetic Roll-Casting and Succeed Rolling of AZ61 Magnesium Alloy,TG339
  14. Development of Cr-Mo Alloy Steels for Liner Applications and Assessment of Its Wear Resistance,TG335.5
  15. Microstructure and Texture of Interstitial-Free Steel Sheet by Side-rolling,TG142.1
  16. Control of Microstructure and Property for Gear Steel 16MnCr5,TG142.4
  17. Research on Schedule Plan and Control of Shougang Cold Rolling Project,F426.31
  18. Electrospinning Bombyx Mori Silk and Produce Reinforced Composite Nanofiber,TB383.1
  19. Pilot-scale Study on Tertiary Treatment of Emulsion Wastewater from Cold Rolling,X757
  20. Research on the Control Algorithm for Hydraulic APC of An Experimental Rolling Mill,TP273
  21. Dynamics of High Speed Spindle and its Impact on the Stability of Machining,TG502.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Non - ferrous metals and their alloys > Light non-ferrous metals and their alloys > Magnesium
© 2012 www.DissertationTopic.Net  Mobile