Dissertation > Excellent graduate degree dissertation topics show

The Experimental Study of the FRP Composite Material Damage by Acoustic Emission Monitoring Technique

Author: WangYu
Tutor: LiWei
School: Northeast University of Petroleum
Course: Chemical Process Equipment
Keywords: FRP composite materials damage acoustic emission finite element
CLC: TB33
Type: Master's thesis
Year: 2011
Downloads: 164
Quote: 0
Read: Download Dissertation

Abstract


Composite is widely used in various aspects for its high specific tenacity, high specific modulus, high tolerance of damage and designable performance. However, during composite materials processing can easily produce composites defects, such as slack, cracks, pores and ill-cohesion of the interface. The factors such as loading, mechanical damage, fatigue, creep and other complex conditions which composites endured in the process of active service may cause the damage of the composite, and the serious damage will lead the entire failure of the material which may cause significant economic losses. Therefore it is important to research on the damage and performance prediction of composites at present.In the process of Composite materials bearing, there are many damage forms, such as matrix cracking, interface separation, fiber deboning and fiber breakage etc. But the obvious acoustic emission characteristics occur in each kind of damage. This paper based on FRP composite materials, using ANSYS finite element analysis software to simulate the damage process of FRP composite materials vessel with rubber lining. To analysis the mechanical properties of composite vessel under 10MPa, 20MPa, 30MPa pressure conditions; To establish acoustic emission monitoring experiment system for FRP composite veneer tensile and vessel hydrostatic. Monitoring of acoustic emission signal generate by FRP composites different angles of veneer tensile and vessel of hydraulic experiment. Combined with force - the displacement curve, it uses 3d parametric to analysis tensile fracture stages. With statistic method, compared the two kinds of typical laid the composite Angle of acoustic emission characteristics and fracture mechanism. Using acoustic emission parameter analysis to discuss the hydraulic blasting process of composite vessel could be divided several stages and its characteristics. And felicity ratio is used to judge the vessel damage degree. The study of acoustic emission characteristics under the damage status of FRP composite material can provide theoretical basis for the performance evaluation of composite materials.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  5. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  6. Based on Nonliner Finite Element Analysis of the Infilled Wall Frame Structure,TU323.5
  7. Research on Testing and Analyzing Technology for Time Parameter of Aerospace Relay,TM58
  8. Research on the Effects of Protection and Renovation of Apple Polyphenols on UVB-Induced HepG2 Cell Injury,S661.1
  9. Stability Analysis of Roller Compacted Concrete Gravity Dam Based on Time-history Method,TV642.2
  10. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  11. Based on the tutor clinical experience in medical treatment of chronic kidney disease proteinuria,R277.5
  12. The Yishenhuoxue methods for the treatment of kidney stones extracorporeal shock wave lithotripsy of renal injury after clinical studies,R277.5
  13. Design of Testing Equipment for Electronic Products,TN06
  14. The Study of Lead Exposure on Cyprinus Carpio Ovary Epithelial Cells,X174
  15. S-lay Installation Analysis for Deepwater Pipeline,TE973
  16. Study on the Occurrence, Damage and the Technology of Controling the Weeds in Direct-Seeding Rice Field of Huai Bei Area,S451.1
  17. Studies on the Characteristics of Japonica Rice Varieties Which Are the Most Widely Cultivated in Zhejiang Province,S511.22
  18. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  19. Rate-dependent Endochronic Damage Constitutive Model for Concrete,TU528
  20. Study on the Application Technique of Frequoscillation Pest-Killing Lamp in Vegetables,S436.3
  21. The Analysis and Comparison of Adjacent Segment Degeneration of the Finite Element Caused by Three Posterior Lumbar Fusion Style,R687.3

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials
© 2012 www.DissertationTopic.Net  Mobile