Dissertation > Excellent graduate degree dissertation topics show

Study and Application of Composite Materials Based on Perovskite Nanoparticles

Author: ChuYanWen
Tutor: LinShengLing
School: Jiangsu University of Science and Technology
Course: Applied Chemistry
Keywords: polypyrrole chitosan perovskite photocatalytic hydrogen peroxide biosensor
CLC: TB332
Type: Master's thesis
Year: 2011
Downloads: 38
Quote: 0
Read: Download Dissertation

Abstract


In recent years, organic polymer-inorganic nanocomposites research has become very attractive. This material will have hope be used in optics, electromagnetism, mechanics, biology and other fields.In this dissertation, the composite oxide of La0.7Ca0.3Fe0.25Co0.75O3 nanocrystalline has been synthesized by glycine-nitrate combustion method. The La0.7Ca0.3Fe0.25Co0.75O3 crystal species and grains are characterized by XRD, SEM, EDS and IR measurements. The results show that La0.7Ca0.3Fe0.25Co0.75O3 grains are spherical, diameter is 19.1mm, under the situation of reunion. At the same time, Chitosan/La0.7Ca0.3Fe0.25Co0.75O3 Nanocomposite Films has been synthesized by sol-gel method in the solution of chitosan, and its surface, composition changes as well as the particle sizes were analysed by the above analytical method. The result show that there is a strong hydrogen bond between the interaction of chitosan and La0.7Ca0.3Fe0.25Co0.75O3 , the molecular interaction disrupt the original crystal structure of the chitosan. The new molecular array was generated in the complex process between chitosan and La0.7Ca0.3Fe0.25Co0.75O3 . So that good dispersion and compatibility can be formed between the two groups.A novel nanocomposite photocatalyst PMo12/PPy/La0.7Ca0.3Fe0.25Co0.75O3 has successfully been prepared first by using a chemical oxidation method with （NH4）2S208 as an oxidant to form PPY/La0.7Ca0.3Fe0.25Co0.75O3 nanoparticles and then by an electrostatic assembly of PMo123- anions. The resulting materials are characterized by XRD, SEM, FT-IR techniques. Photocatalytic performance test is taking low concentration of methylene blue dye solution as the degradation of target. The results show that the load modification of PMo12 improved the photocatalytic activity of La0.7Ca0.3Fe0.25Co0.75O3 /PPy.La0.7Ca0.3Fe0.25Co0.75O3 nanoparticles were immobilized on CS（chitosan） using cross-linking processing. The resulting materials were characterized by XRD, SEM, FT-IR techniques respectively. The effects of some factors were studied by the degradation of acid orange dye under mercury lamp irradiation. The results showed that the catalyst could degrade acid orange dye effectively, and the decolorization rate can reach 99%.A uniform film of polypyrrole was electrochemically polymerized and immobilized on the surface of glassy carbon electrode（GCE）, and a layer of La0.7Sr0.3NiO3 and chitosan（CS） composite film was absorbed on the surface of PPY film. Preparation of the enzyme modified electrode ,used as biosensor for determination of H2O2 , was finally completed by immobilization of the bovine hemoglobin（Hb） on to the surface of La0.7Sr0.3NiO3 /CS/GCE. The modified electrode was characterized with cyclic voltammetry （CV） and scanning electron microscope （SEM）. The biosensor displays excellent catalytic activity and rapid response for H2O2 . The linear range for the determination of H2O2 is from 7.0×10-6 to 1.5×10-3 mol/L with a detection limit of 9.0×10-8 mol/L.

Related Dissertations

  1. Preparation and Photocatalytic Properties for Water Decomposition of Titanate Photocatalyst,O643.36
  2. Studies on Chitosan and Its Derivatives Adsorption for Paralytic Shellfish Poisoning in Ostrea Rivularis Could,TS254.4
  3. Thermal Stability of Complexes of Chitosan Quaternary Ammonium Salt and Metal Ion,O634
  4. Polyethylenimine Conjugated Stearic Acid-g-chitosan Oligosaccharide Micelles for Antitumor Gene Therapy,R450
  5. Preparation and Characterization of the OCS/PLLA Composite Film for Biomedical Materials,R318.08
  6. Study on the Accumulation and Remove of Cadmium and Lead in Oysters,X174
  7. Study on the Synthesis and Adsorption Behaviour of Chitosan Derivative,TS254.9
  8. Improvement of Preparation Technology for Chitin and Chitosan from By-product of Litopenaeus Vannamei,TS254.9
  9. Biological Control of Meloidogyne Spp. in Cucumber (Cucumis Sativus L.) and Development of the Ecological and Environment-friendly Fertilizer with Pesticides,S436.421
  10. Study on the Synthesis of the Polypyrrole-Cobalt Oxides and Their Catalytic Behavior for the Electroreduction of H2O2,O643.32
  11. Preparation and Photocatalytic Properties of Semiconductor Oxides,O643.36
  12. Copper oxide porous hollow microspheres Preparation and Characterization,O614.121
  13. Nano LaFeO 3 Controllable Synthesis and TiO 2 bridged construct composite photocatalyst,O643.36
  14. Prodction, Purification and Immobilization of a Thermoalkaliphilic Catalase from Thermoascus Aurantiacus,TQ925
  15. Synthesis and Characterization of Tio2 -based Nanostructures,TB383.1
  16. Synthesis and Visible Light-Driven Photocatalytic Performances of Silver Halide/Conducting Polymer Nanocomposites,TB383.1
  17. The Construction and the Vitro Photodynamic Effects Evaluation of Chitosan-chlorin E6-single Wall Carbon Nanotubes Drug Delivery System,TQ460.1
  18. Layered Ppy / CRGO Nanocomposites Preparation and Application in Supercapacitors,TM53
  19. Studies on Synthesis, Characterization and Properties of Fe-V Co-doped TiO2 Catalyst,O614.411
  20. The Construction of Novel Nano-carrier and Its Application on Effective Transcutaneous Immunization,R94
  21. Preparation of High Amount of Amino Porous Chitosan Resin and Their Adsorption Performance Study,X791

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile