Dissertation > Excellent graduate degree dissertation topics show

The Analysis about Atomization Electrode of Electrostatic Oiler and Experimental Research

Author: YangZhiWei
Tutor: GaoQuanJie
School: Wuhan University of Science and Technology
Course: Mechanical Design and Theory
Keywords: electrostatic oiler atomizing electrode gas discharge finite element analysis air pressure auxiliary atomization
CLC: TE933.1
Type: Master's thesis
Year: 2011
Downloads: 49
Quote: 0
Read: Download Dissertation

Abstract


At present, the research in the area of electrostatic spraying technology mainly focus on the charged medium atomization mechanism,the electrostatic spray experiment,the numerical simulation and so on. This paper is based on the electrostatic oiler produced by Wuhan University of science and technology as a research object, the microscopic mechanism of the atomization in the high voltage electrostatic field and the air flow field was explained. Analysis the effects of air medium on the electric field by using the theory of gas discharge, and the finite element simulation to the high voltage electrostatic field of oiler room. Put forward to add needle electrode structure in the existing oiler beam, in order to make the new structure to achieve a better atomization effect. Finally, the atomization situation was analyzed under the combined action of high electrostatic and air pressure by the experiment.Firstly, according to the work of the electrostatic oiler, the micro-atomization mechanism of the liquid was expounded in high voltage electrostatic field, the impact of electric field intensity on atomization was analyzed, and the critical electric intensity of the broken liquid was duduced; Combining with the point discharge theory, the discharge process of electrostatic oiler atomizing electrode was analyzed, the reason of the knife beam electrode tip electric field strength distortion from air medium was obtained; For the effect of electrode structure on electric field, the additional needle electrode of the new knife beam structure was proposed.Secondly, the ANSOFT MAXWELL 12 finite element software is used to model calculation with the electrostatic oiler room, the impact of the knife beam electrode tip electric field strength distortion from air medium was verified; The proposed new knife beam structure was modeled and analyzed, and compared to the distribution of the electric field with original knife beam electrode, the corresponding conclusion was obtained.Finally, the microscopic mechanism of liquid spraying under the air pressure was analyzed, and the test device for experiments was designed and installed by myself, the liquid electrostatic atomization effect in the case of the air pressure supplement was observed, And the effect of the air pressure in electrostatic spray processes was obtained, provided a new method for the improvement of electrostatic oiler.

Related Dissertations

  1. EDM Electrode Wear Mechanism and Control Research,TG661
  2. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  3. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  4. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  5. The Finite Element Analysis and Topology Optimization of Kingpin for Bogie,U270.33
  6. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  7. Design and Fabrication of Micro Fabry-Perot Tunable Filter,TN713
  8. Al Wire Bonding Failure and Automatic Optical Inspection on Power Device Leadframe,TG441
  9. Three-dimensional Thermal Simulation and Structure Design of Phase Change Access Random Memory,TP333.8
  10. Research on the Light-Weight Optimization of Disc Brake Structure Based on CAD/CAE Technique,U463.512
  11. Residual Strength Analysis of Structures with Multiple Site Damage Based on Crack Tip Opening Angel Criterion,O346.1
  12. Design of Magnetic Circuit Structure and Experiment Study of Magnetostrictive Transducer Based on Finite Element Method,TN712.2
  13. Submarine pipeline and the sea bed soil interaction finite element analysis,P756.2
  14. High voltage discharge in water to generate hydrogen peroxide Law of,X703
  15. High strength aluminum alloy Mechanism and Friction Stir Welding Process,TG453.9
  16. New tamping unit design and characteristics of electro-hydraulic shaker,U216.6
  17. Metal-halide Lamp Recycling Collection Technology,X705
  18. Research on the Structural Emission Noise of Axial Piston Pump,TH137.51
  19. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  20. Research on Ground of Deformation Simulation Test-bed,TU433
  21. Structural Reliability Analysis and Experimental Verification on Foam Cored Sandwich Panel,TB30

CLC: > Industrial Technology > Oil and gas industry > Oil machinery and equipment and automation > Oil and gas production machinery and equipment > Pumping mechanical equipment > Pumping
© 2012 www.DissertationTopic.Net  Mobile